Mineral wool, as a kind of thermal insulation material, is widely used in industry, building thermal insulation, fire prevention and sound absorption.

In the Eu market, the "CE" mark is a mandatory certification mark to show that the product meets the basic requirements of the EU directive "New Method for Technical Harmonization and Standardization". This is a mandatory requirement for products under EU law.

CE marking on mineral wool not only proves that the product complies with the construction Products Directive (CPR 305/2011/EU) and related standards (Harmonized European Standard EN 13162) for safety, environmental protection, health and consumer protection. Moreover, it can reasonably avoid technical barriers to trade, sell freely in the European market and open up other international markets.

Note: The Construction Product Directive (CPD) 106/89/EEC replaces the Construction Product Directive (CPD).And it will be mandatory from July 1, 2013

EN 13162 Mineral wool CE certification— scope

This European Standard specifies the requirements for factory made mineral wool products, with or without facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the mat blankets, boards or slabs.

Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.

This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.

This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards.

Products with a declared thermal resistance lower than 0,25 m2-KW or a declared thermal conductivity greater than 0,06o Wl(m·K) at 10 Care not covered by this standard.

This standard does not cover in situ insulation products (covered by EN 14064 parts 1 and 2) and products intended to be used for the insulation of building equipment and industrial installations (covered by EN 14303).

CE certification process of mineral wool:

1. Determine the type of products to be certified and submit the application

2. Confirm the European Product Directive, mineral wool must comply with the new EU building Products regulation CPR 305/2011/EU

3. Determine the European harmonized standard, mineral wool must comply with harmonized standard EN 13162

4, according to the CPR directive and harmonized standard EN 13162 for the evaluation of the test, the European Union certification body in accordance with the certification system 3 test certification

5. Obtain the test report and certificate issued by the European Union announcement body

6. Declaration of Performance

7, in the product packaging with the announcement of the organization code CE mark

8. Freely available in the European market

Tel：0592-3500085-803

email：info@CASfire.cn

web：http://www. CASfire.cn

fromJJ2022