CE marking to carpet / CE marking to textile - Directive and Harmonized Standard

CE marking to carpet / CE marking to ceilings – Introduction

In the EU market, the "CE" mark is a mandatory certification mark to indicate that the product complies with the basic requirements of the EU New Method for Technical Coordination and Standardization. This is a mandatory requirement of EU laws on products.

 The CE mark on the ceiling can not only prove that its products comply with the safety, environmental protection, health and consumer protection specified in the Construction Products Directive (CPR 305/2011/EU) and its related standards (European harmonized standard EN 14716). In addition, it can reasonably avoid technical barriers to trade, sell freely in the European market and open other international markets.

Note: CPR (Construction Product Regulation) 305/2011/EU fully replaces CPD(Construction Product Directive) 106/89/EEC, And it will be mandatory from July 1, 2013

CE marking to Engineered Stretched ceilings－EN 14716 - Standard

EN 14716 Stretched ceilings —Requirements and test Methods

If you want to obtain the ceiling CE certification, you need to comply with the product directive: Construction Product Regulation 305/2011/EU, and the European harmonized standard: EN 14716

CE marking to carpet / CE marking to ceilings - EN 14716- scope

This document specifies the characteristics, specifications and test methods for stretched ceilings made up of single or multi-layer sheets, coated fabrics or fabrics made up of coated or monofilament yarn with a fastening system.

It also specifies the method of conformity assessment for stretched ceilings.

CE marking to Engineered Stretched ceilings－EN 14716 - Procedure

1. Identify the type of your products and submit the application.

2.Identify your Products subject to New Construction Products Regulation CPR 2011/305/EU.

3. Identify your Products subject to EU Harmonized Standard EN 14716.

4. according to CPR directive and harmonized standard EN 14716 Carry out test and evaluation, and test and certification according to certification system 3

5. Obtain the report or/and certificate awarded by EU Notified Body

6. Sign the DOP document "Declaration of Performance"

7. Affix "CE Mark" on the product

8. Trade in European market freely

CE marking to Engineered Stretched ceilings－EN 14716 - Reference Standard

EN 1875-3, Rubber- or plastics-coated fabrics - Determination of tear strength. Part 3: Trapezoidal method.

EN 12149, Wall coverings in roll form - Determination of migration of heavy metals and certain other elements,

of vinyl chloride monomer and of formaldehyde release.

EN 12280-1, Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing.

EN 13238, Reaction to fire tests for building products - Conditioning procedures and general rules for

selection of substrates.

EN 13501-1, Fire classification of construction products and building elements - Part 1: Classification using

test data from reaction to fire tests.

EN 13823, Reaction to fire tests for building products - Building products excluding floorings exposed to the

hermal attack by a single burning item.

EN ISO 105-B02, Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc

fading lamp test (ISO 105-B02:1994, including Amendment 1:1998).

EN ISO 527-1, Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:1993

including Corr 1:1994).

EN ISO 527-3, Determination of tensile properties - Part 3: Test conditions for films and sheets

(ISO 527-3:1995).

EN ISO 846, Plastics - Evaluation of the action of microorganisms (ISO 846:1997).

EN ISO 1182, Reaction to fire tests for building products - Non-combustibility test (ISO 1182:2002).

EN ISO 1421, Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break

(ISO 1421:1998).

EN ISO 1716, Reaction to fire tests for building products - Determination of the heat of combustion

(ISO 1716:2002).

EN ISO 2286-2, Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for

determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate

(ISO 2286-2:1998).

EN ISO 9001, Quality management systems - Requirements (ISO 9001:2000).

info@casfire.cn

JJ2022