The tipping converter is developed on the basis of the fixed axis rotary aluminum melting furnace and the reflection aluminum melting furnace. Learning the operating experience of some foreign converter technologies, such as converters in the UK, is their upgraded product.

Therefore, it has a series of advantages.

1. It is an effective equipment to recover aluminum from aluminum slag. It is an advanced smelting equipment for scrap aluminum foil, scrap light aluminum and other non-ferrous metal scraps. It has obvious advantages in energy saving and environmental protection.

2. Compared with the traditional converter, the operation safety is greatly improved, the service life can be nearly doubled, and the recovery rate of aluminum in the slag can reach 80%, an increase of more than 20 percentage points;

3. It is especially suitable for processing thin and light wastes such as waste aluminum foil, and the recovery rate can be increased by more than 5%.

4. Compared with the reverberatory furnace, the amount of slag-forming agent can be reduced by 50% in the aluminum processing plant by using the waste in the smelting process of the furnace. The furnace is fully automated and can be operated by one person

5. The production efficiency of zinc slag treatment is 50% higher than that of reverberatory furnace.

6. When recovering lead from lead-acid batteries, the charging volume can reach 3 times that of the reverberator, and the production efficiency can be increased by 200%;

7. In addition, the furnace has also achieved good efficiency when recovering and treating platinum from platinum slag, and only energy saving can reach 25%.