New CLG4165 125kw motor grader for road construction work
Negotiable
Min.Order:1
Evangel Industrial (Shanghai) Co., Ltd.
20 ton Tire Roller XP203 Road Roller pneumatic roller with Air-conditioned Cab
New cold milling machine XM1303K 1.3m width road maintenance equipment
New 15500kg 180hp motor grader 4180D with five-shank rear ripper
New 142kw motor grader CLG4180D/4180D/CLG4180 with rear ripper
Super heavy duty XS203 self-propelled 20t vibratory road roller
20 ton road roller single drum full hydraulic system compactor XS203
Engine | DCEC 6BTAA5.9-C180 | |||
Rated Power | (kW) | 125(170)@2200 | ||
Blade Width | mm(inches) | 3960(156) | ||
Maximum Speed | km/h (mph) | 38 (23.6) | ||
Draw Bar Pull | (kN) | 81.6 | ||
Operating Weight | kg(Lb) | 15000 | ||
ENGINE | ||||
Tier | II | |||
Make | Dongfeng Cu-m-mins | |||
Gross Power | kW(Hp)@rpm | 125(170)@2200 | ||
Net Power | kW(Hp)@rpm | 113(151)@2200 | ||
Peak Torque | 750N.m/1300rpm | |||
Torque Rise % | 30% | |||
Number of Cylinders | 6 | |||
Aspiration | turbo air-to-air aftercooled | |||
TRANSMISSION | ||||
Transmission Type | power shift | |||
Transmission Configuration | 6f/3r | |||
Torque Converter | three-member single turbine | |||
Maximum Travel Speed, fwd | (km/h) | 38 | ||
Maximum Travel Speed, rev | (km/h) | 24.7 | ||
Number of Speeds, fwd | 6 | |||
Number of Speeds, rev | 3 | |||
AXLES | ||||
Front Axle Make | Liu-G-ong Weld axle | |||
Rear Axle Make | Me-ritor | |||
Differential Type | NO-SPIN limited slip standard | |||
Final Drive Type | chain drive | |||
Axle Oscillation | ±15° | |||
Front Axle Type | all welded steel frame | |||
Front Axle, Wheel Lean Angle | ±17° | |||
STEERING | ||||
Steering Configuration | load sensor steering gear | |||
Steering Relief Pressure | (Mpa) | 17 | ||
Minimum Turning Radius | (inches) | 7800(307) | ||
Steering Angle | ±45° | |||
Frame Articulation Angle | ±20° | |||
BRAKES | ||||
Service Brake Type | (Dry )shoe | |||
Service Brake Location | ear axle only | |||
Service Brake Actuation | hydraumatic | |||
TIRES | ||||
Tire Size | 17.5-25 PR12/L3 | |||
HYDRAULIC SYSTEM | ||||
Main Pump Type | gear | |||
Main Relief Pressure | (Mpa) | 18 | ||
Pilot Pump Flow | L(Gal)/min | 126(33) | ||
WORKING CAPACITIES | ||||
Maximum Draw Pull | (kN) | 81.6 | ||
Cutting Pressure | kg(Lb) | 6800(14991) | ||
TANDEM DRIVE PERFORMANCE | ||||
Height | mm(inches) | 600(24) | ||
Width | mm(inches) | 210(8) | ||
Thickness, inner wall / outer wall | mm(inches) | 20/20(0.8/(0.8) | ||
Center Distance | mm(inches) | 1538(61) | ||
Oscillating Angle | ±15° | |||
MOLDBOARD PERFORMANCE | ||||
Bank Cut Angle | 40~70 | |||
Moldboard Lift Above Ground | mm(inches) | 450(18) | ||
Moldboard Side Shift, right / left | mm(inches) | 725/675(29/27) | ||
Maximum Sloping Angle | 90° | |||
Cutting Depth | mm(inches) | 555(22) | ||
Circle Rotation | 360° | |||
Circle Diameter | mm(inches) | 1455(57) | ||
Circle Thickness | mm(inches) | 135(5) |