Road Construction Machinery, buy New cold milling machine XM1303K 1.3m width road maintenance equipment on China Suppliers Mobile

Product Details

New cold milling machine XM1303K 1.3m width road maintenance equipment

Product Description

New cold milling machine XM1303K 1.3m width road maintenance equipment

XM1303K road milling machine is a high-performance 1.3m-wide milling machine mainly used for the digging and renovation of asphalt concrete pavements in highways, downtown roads, airports, cargo yards, and parking lots.

Performance Characteristics:

* This machine is powered by Shangchai 177kW electronic injection engine is applied to achieve higher power reserve than domestic like products. With higher working power, this engine can be used to effectively handle the working conditions with harder material and higher milling depth.

* This engine conforms to the China III emission regulation to advocate environmental-friendly construction and reduce environmental pollution. With the fuel consumption at 40L/h under rated power, this engine features lower fuel consumption and better operation economy.

* The milling drum in diameter of 930mm is installed to achieve the 300mm maximum miling depth and remove the whole asphalt concrete pavement by single cycle.

* The 45m/min working speed is higher than the like products. Three working speeds are provided to achieve more accurate matching between working speed and working load.

* The milling drum is driven by mechanical belt to achieve higher drive efficiency than hydraulic drive. The super -high capacity water tank and fuel tank (860L and 450L respectively) guarantee longer continuous working time and reduce the down time.

* The intelligent sprinkling control technology is applied so that the sprinkling is turned off automatically at the stop of milling and is turned on automatically at the restart of milling to save the manual operation steps.

Item		Unit	XM1303K
Milling drum	Milling drum Milling width	mm	1300
	Milling depth	mm	300
	Tool spacing	mm	15
	Number of tools		119
	Rotor diameter with tool	mm	930
Engine	Model		SC9DK240G3
	Cooling method Water cooling		Water cooling
	Number of cylinders		6
	Rated power/speed	kW	177
	Displacement	L	8.8
	Rated power consumption	L	40
	Comprehensive fuel consumption	L	13.3
	Emission Standard		National Ⅲ
	Electrical system	V	24
Box capacity	Box capacity Fuel tank	L	450
	Hydraulic oil tank	L	130
	Water tank	L	860
Driving performance	Driving performance Maximum operating speed	m/min	45
	Maximum speed	km/h	8
	Theoretical climbing ability	%	75
	Ground clearance	mm	180
Tire	Tire Tire Form Solid Rubber Tire		Solid Rubber Tire
	Front tire size	mm	645×300
	Rear tire size	mm	645×300
Milling material conveying	Milling material conveyor Belt width	mm	500
Milling material conveying	Theoretical feeding capacity	m3/h	127
Transport size	Shipping Size Host Size (L×W×H)	mm	4837×2846×3745
	Host size (right leg swings into the frame) (L×W×H)	mm	4837×2357×3745
	Folding conveyor size	mm	7300×1085×980
Machine weight	Machine Quality Work	kg	17500
	Front axle load (under working quality)	kg	6000
	Rear axle load (under working quality)	kg	11500

Contact Ways

Penny Wang
Sales Manager
Whatsapp/Wechat/Mobile:008618721261510

Email: penny"A"

Company Introduction