Best sale SS304/ss316 conservation Plate Dryer for Molybdenum concentrate
Best sale SS304/ss316 conservation Plate Dryer for Molybdenum concentrate
Best sale SS304/ss316 conservation Plate Dryer for Molybdenum concentrate
Best sale SS304/ss316 conservation Plate Dryer for Molybdenum concentrate
Best sale SS304/ss316 conservation Plate Dryer for Molybdenum concentrate

Best sale SS304/ss316 conservation Plate Dryer for Molybdenum concentrate

Negotiable

Min.Order:1

Supply Ability:
1000 per Month
Payment Terms:
T/T Credit Card

Changzhou Haomai Drying Engineering Co., Ltd.

Business Type: Association
Main Products: , , ,

Product Details

Product Description
Best sale SS304 energy conservatio Plate Dryer for Molybdenum concentrate
PLG Series Continuous disc dryer is a high efficiency conducting and continuous drying equipment. Its unique structure and operating principle determine that it has advantages of high heat efficiency, low energy consumption, small occupied area, simple configuration, easy operation and control as well as good operating environment and etc. It can be widely used in drying process in the fields of chemical, pharmaceuticals, agricultural, foodstuff, feed, and other industries.

There are three major types: normal pressure type, closed type, and vacuum type; and four major models: 1200, 1500, 2200 and 3000; and three kind of material grades, A (carbon steel), B (use stainless steel for material contacted area), and C (use stainless steel for material contacted area, steam pipes, main shaft and supports, and linings for cylinder body and top cover).The drying area of the dryer is 4 to 180㎡. We have produced hundreds of models with auxiliary devices which are available to meet requirements of all customers.
Working principle
The wet material is fed continuously to the first drying layer on the top of the dryer. It will be turned and stirred by rakes
when the rake arm rotates and drop down to the outer edge of the large drying plate along the exponential helical line. The
material will be moved from the small drying plate to its outer edge and drop down to the outer edge of the large drying plate underneath. Both small and large drying plates are arranged alternately so the materials can go through the dryer continuously.The heat medium can be saturated steam, hot water or thermal oil. The heat will be led into hollow drying plates from one end and come out from the other end. The dried materials will drop from the last layer of the drying plate to the bottom of the dryer and then moved by rakes to the discharge outlet. The material moisture will be removed from the exhaust outlet on the top cover. For the vacuum-type plate dryer, the moisture will be sucked out by the vacuum pump on the top cover. The dried materials will be discharged from the bottom layer. The drying capability can be improved if the dryer equipped with supplementary devices such as finned heater, condenser for solvent retrieval, bag dust remover, return and mix mechanism, draft fan, and etc.
Technical parameters
Type
Diameter(mm)
Height(mm)
Drying Area(m2)
Power (kw)
1200/4



Φ1850
2718
3.3

1
1200/6
3138
4.9
1200/8
3558
6.6

1.5
1200/10
3978
8.2
1200/1
4398
9.9



2.2
1500/6





Φ2100
3022
8.0
1500/8
3442
10.7
1500/10
3862
13.4
1500/12
4282
16.1




3.0
1500/14
4702
18.8
1500/16
5122
21.5
2200/6










Φ2900
3319
18.5
2200/8
3739
24.6
2200/10
4159
30.8

4.0
2200/12
4579
36.9
2200/14
4999
43.1

5.5
2200/16
5419
19.3
2200/18
5839
55.4

7.5
2200/20
6259
61.6
2200/22
6679
67.7


11
2200/24
7099
73.9
2200/26
7519
80.0
Type
Diameter(mm)
Height(mm)
Drying Area(m2)
Power (kw)
2500/6










Φ3150
3319
26.3

4
2500/8
3739
35
2500/10
4159
43.8

5.5
2500/12
4579
52.5
2500/14
4999
61.3
7.5
2500/16
5419
70
2500/18
5839
78.8


11
2500/20
6259
87.5
2500/22
6679
96.3
2500/24
7099
105

13
2500/26
7519
113.8
3000/8










Φ3800
4050
48




11
3000/10
4650
60
3000/12
5250
72
3000/14
5850
84
3000/16
6450
96
3000/18
7050
108



13
3000/20
7650
120
3000/22
8250
132
3000/24
8850
144
3000/26
9450
156

15
3000/28
10050
168
Exhibition
Product features
(1) Easy to adjust and control, good applicability.
- The drying efficiency can be improved by adjusting the thickness of material layer, rotary speed of main shaft, quantity of
harrow arm, shape and size harrow plates.
- Each drying layer can input hot medium or cool medium individually for heating or cooling. The temperature control is accurate and easy to adjust.
- The residence time of materials can be adjusted accurately.
- Single material flowing direction to prevent material return and mixing. The drying process is uniform and the quality stable, no re-mixing is required.
(2) Easy to operate
- Simple operation for turn on and turn off.
- After material feeding is stopped, the remaining material inside of the machine can be easily discharged out by the harrows.
- You can clean and observe inside from the large-scale viewing window.
(3) Low energy consumption
- The material layer is thin and the rotary speed of main shaft is low so it required low power and electricity consumption.
- The material is dried by conducting heat so it has high heating efficiency.
(4) Good operation environment
- Normal pressure type:
The speed of air flow inside of the machine is low and the humidity is high in upper end and low in bottom end so the dust can’t float to the top which keeps no dust in the exhausted air.
- Closed type:
The machine is equipped with solvent recovery device which can recover organic solvent easily from the wet air. The solvent recovery device has a simple structure and high recovery rate. For the flammable, explosive and poisonous materials, the nitrogen can be used as medium for closed circulation and keeps a safe working condition.
- Vacuum type:
The plate dryer is operating under vacuum condition and it is particularly suitable for drying heat sensitive materials.
(5) Easy installation
- The dryer is delivered in a complete piece so it is quite easy to install and fix at site.
- The disc plates are being arranged by layers and it will be installed vertically so it takes a small occupying area from the
workshop.
APPLICATION
Applicable Materials:
Drying, heat decomposition, combustion, cooling, reaction, and sublimation
1. Organic chemicals
2. Mineral chemicals
3. Pharmaceutical and foodstuff
4. Feed and fertilizer
Technical characteristics
1. Drying Tray
- Designing pressure: generally 0.4Mpa, and the max. pressure is 1.6 MPa.
- Max. working pressure: generally ≤0.4Mpa, and the max. pressure is 1.6 MPa.
- Heat source: steam, hot water, or thermal oil: Use hot water as heat source when the drying plates’ temperature is 100°C; Use saturated water steam ≤0.4Mpa or steam-gas when the drying plates’ temperature is 100°C~150°C; Use thermal oil when the drying plates’ temperature is 150°C~320°C;
2. Material Transmission System
- Revolution of main shaft: 1~10 rpm, electromagnetism or transducer timing.
- Rake arm: 2 to 8 rake arms will be fixed on the main shaft on the every layer.
- Rake blade: the rake blades are hinged to the rake arms and float with the surface of the plate. There’re several types of rake blades.
- Roller: For the material that is easy to agglomerate, or required to be grinded, the rollers shall be placed at the appropriate
place to reinforce the heat transfer and drying process.
3. Three types of dryer body: normal pressure, sealed, and vacuum
- Normal pressure: The dryer body is cylindrical or octagonal and the structure can be integrated or separated. The ducting system for the heat source can be placed inside or outside of the dryer.
- Sealed: The dryer body is cylindrical and it can bear the interior pressure of 5KPa. The ducting system for the heat source can be placed inside or outside of the dryer.
- Vacuum: The dryer body is cylindrical and the design pressure is 0.1MPa. The ducting system for the heat source is placed inside of the dryer.
4. Air Heater:
The air heater is usually used to meet larger evaporation capacity requirements in order to increase drying efficiency.
Company Profile
Changzhou Haomai Drying Engineering Co., Ltd. Specializes in Spin flash dryers, centrifugal spray drying equipment, vibrating fluid bed dryers and other equipment R & D, manufacturing, business and related export services. The factory is located in Sanhekou industrial park, Zhenglu town, Changzhou City, Jiangsu Province. Over the years the design of equipment involved in pharmaceuticals, chemicals, pesticides, electronics, mining, food, dyes, pigments and other areas, and sell our products throughout the whole country. Haomai not only with work experience in a group of more than a decade of lean engineering and technical personal and senior management, but also has a number of excellent production staff. Their research, design, service and so has an excellent ability for many years they concentrated on studying in practice wrap-up, God help those who help themselves, a deep understanding of effective guarantee for the quality of customers' products. Facing with the global energy conservation issue, facing the fierce market competition, Haomai people do not pursue the company's output value and profit maximization, but seek the best product quality. Good quality is our goal and direction of success. Energy conservation is the secret weapon for us to stand out from the crowd. The most energy-saving equipment is also the social responsibility of our heroic people. Over the years, the equipment we designed has achieved good economic and social benefits in various industries. In the face of the past, we are not satisfied; we are working hard to move toward higher goals.

FAQ

Q: Where is your factory?
A: We are located in Changzhou City which about 150km away from Shanghai.

Q: What’s the quality control procedure?
A:We have an experienced technical team to support and provide solutions to meet the project requirements of our clients. We are certified with ISO9001 quality management system. We are following a strict quality control procedure to ensure the product quality.

Q: What is the warranty period?
A: 24 hours timely response of mail and phone calls. The warranty period for non-artificial damage is 1 year after delivery of goods.

Q: What is the payment term?
A: Our regular payment term is: 30% TT in advance, 70% TT before shipment.

Q: Does your price include freight?
A: Our usual price is based on FOB Shangha. We can provide CIF quote upon request.
Delivery Terms
FOBShanghai. The delivery time is 50 working days from advance payment received and technical drawings confirmed.
Payment Terms
50% deposit TT in advance, 50% balance shall be paid by TT before shipment.
Packing
Seaworthy Packing
Warranty
The warranty period for non-artificial damage is 1 year after delivery of goods.

Contact Supplier

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Machinery > Chemical & Pharmaceutical Machinery > Chemical Machinery & Equipment > Drying Equipment
Categories
Hi~