Curtis Controller, buy Curtis 600A Controller 1253-4804 dc Motor Controller on China Suppliers Mobile

Product Details

Product Description

For the buyer without CONTROLLER APPLYING EXPERIENCE, please consult your cart/motor dealer and read carefully the CURTIS 1253
Controller Manual before making the purchase.
By default, we will deliver the controller with default setting of 48V / 600A / 0-5kΩ (Throttle Type="0"). For better applying the
controller to your system, the buyer should confirm with the seller the throttle type (0-5kΩ, 5k-0Ω or 0 – 5V, etc.).
If you need to modify any controller parameter, please send us a message with the list of parameters to be modified (Click here to
download the parameter list of default setting of controller 1253-4804 (PDF format)). There is no extra cost for reprogramming the
controller.
Overview
The CURTIS 1253 provides a cost-effective solution for control of high power DC series-wound hydraulic pump motors. Its system
integration features are designed primarily for Class I and Class II material handling vehicles. Typical applications include the
pump systems of material handling trucks (counterbalance trucks, reach trucks), aerial lift platforms (scissor lifts,
articulating/telescoping booms), and other industrial vehicles.
The 1253 accepts inputs from up to four Speed Select switches and also from an analog throttle. Its internal microprocessor-based
logic controller provides maximum flexibility at minimum cost. Its performance characteristics can be tailored through an array of
programmable parameters.
The 1253 controller is fully programmable through a CURTIS 1313-4331 Handheld Programmer or 1314 PC Programming Station. The
programming device provides diagnostic and test capability in addition to configuration flexibility.

Product Paramenters

Key Features
* CURTIS Model: 1253-4804
* Norminal Battery Voltage (Volts): 48V
* Amature Current Limit (amps): 600
* Programmable Undervoltage Cutback (Volts): 32-42
* Overvoltage Cutoff (Volts): 60
* PWM operating frequency: 15.6 kHz
* Electrical isolation to heatsink (min.): 500 VAC
* KSI input voltage: 28–60V DC
* KSI input current (no contactors engaged): * 60 mA without programmer
* 130 mA with programmer

* Logic input current: < 1 mA
* Status LED output current (max.): < 2 mA
* Heatsink overtemperature cutback: linear cutback starts at 80°C; complete cutoff at 120°C
* Heatsink undertemperature cutback: 50% current below -25°C
* Operating ambient temperature range: -40°C to 50°C
* Storage ambient temperature range: -40°C to 85°C
* Package environmental rating: IP54
* Throttle Type: 0-5KΩ (default setting), 5K-0Ω, 0-5V or single-ended 3-wire potentiometer (1kΩ to 10kΩ range)
* Dimensions: L196xW146xH77 mm
* Net Weight: 2.6 kg

Features include:
* Smooth and Quiet Control * Programmable acceleration rates provide smooth application of pump motor torque.
* 15.6 kHz PWM frequency for near-silent operation.

* Programmable Flexibility
* Easily programmable through a CURTIS programming device.Four Speed Select inputs (SS1.SS4) with individually programmable top
speeds.Programmable throttle input for precise speed control with a variety of signal sources.Programmable turn-off delay
allows SS4 to be used for power steering.Adjustable minimum speed setting to ensure pump lubrication and to maintain steering
system pressure.
* Robust Safety and Reliability
* Interlock feature disables the controller when operator is not present.Programmable startup lockout prevents inadvertent
operation.Seamless integration with CURTIS gauges (models 803, 841, 906, and enGage. IV) for lift lockout function.Lift lockout
disables the controller at low battery state of charge.Redundant watchdog timer circuits ensure proper software operation.
External Status LED output for easy troubleshooting.Short-circuit protection on main contactor driver.Precharge control
prevents pitting of contactor tips at startup.Thermal cutback provides protection to the controller.Rugged housing meets IP54
environmental ratings.

related products

our factory

Our Company

Hefei Huanxin Technology Development Co., Ltd. has been devoting ourselves to developing and manufacturing and other since 2004.
We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We
have achieved great improvement since our company was founded in 2004.
We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support.

Packing & Delivery

Exhibition

FAQ

Q1. Can I have a sample order? A: Yes, we welcome sample order to test and check quality. Q2. What about the lead time? A: Sample needs 3-5 days. Q3. Do you have any MOQ limit? A: Low MOQ, 1pc for sample checking is available Q4. How do you ship the goods and how long does it take to arrive? A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional. Q5. How to proceed an order? A: Firstly let us know your requirements or application. Secondly We quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly We arrange the production. Q6. Is it OK to print my logo on the product? A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample. Q7: Do you offer guarantee for the products? A: Yes, we offer 1 year warranty to our products. Q8: How to deal with the faulty? A: Our products are produced in strict quality control system and the defective rate will be less than 0.2%

Please feel free to contact us if you have any problem!