Curtis Controller, buy Curtis 1230 AC Motor Speed Controller for golf cart electric vehicle eve conversion kits on China Suppliers Mobile

Product Details

Product Description

Notice: For the buyer without CONTROLLER APPLYING EXPERIENCE, please consult your cart/motor dealer and read carefully the CURTIS
1230 AC Motor Controller Manual before making the purchase. For more details of controller default setting, please click here to
download the controller default setting parameter list, PDF format.
As a professional supplier, we possess OEM programs (controller settings) of certain utility vehicles and forklifts. Buyers may
contact us and send us the vehicle (forklift) information (manufacturer, model, year of production, etc.), for knowing if we can
provide the controller with its OEM program. This 1230-2402 can also be programmed by CURTIS 1313-4331 Handheld Programmer or
CURTIS 1314 PC Programming Station. There is no extra cost for reprogramming the controller. Examples: click the links below for
downloading:
* the setting of HANGCHA 2T 24V forklift, PDF format
* the setting of EP 24V pallet stacker ES-16, PDF format
* the setting of XILIN 24V pallet stacker CDDK15, PDF format

For setting correctly the controller 1230-2402, some detailed information should be considered: encoder, EM brake, emergency
reverse, motor & battery specifications, etc.
Overview:
The CURTIS 1230 motor controller is an AC induction motor speed controller designed for use in a variety of material handling
vehicles. Typical applications include walkie/rider pallet trucks, low lifts, stackers, sweeper/scrubber machines, and other small
industrial vehicles. This high performance programmable controller is simple to install, efficient, and cost effective.
The 1230 controller offers smooth precise control of motor speed and torque. When used with hydraulic systems, the 1230 turns the
pump motor on and off and also controls valves on the hydraulic line—thus controlling the hydraulic path for Lift and Lower
operations. These controllers are fully programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming
Station. The programmer provides diagnostic and test capability in addition to configuration flexibility. The 1230 is also
designed to work with the optional CURTIS 840 Spyglass data display and the optional CURTIS 1312 tiller multiplexer.

Product Paramenters

Key Features:
* CURTIS Model: 1230-2402
* Operating voltage range: 16 to 32 V
* Nominal input voltage: 24 V
* 2 Minute Current Rating (amps): 200
* 1 Hour Current Rating (amps): 80
* MOSFET overtemperature cutback: linear cutback starts at 100°C; complete cutoff at 110°C
* MOSFET undertemperature cutback: approx. 50% motor current at -25°C; complete cutoff at -40°C
* CURTIS 1230 controllers support different throttle types: * Type 1: two-wire 5kΩ-0 potentiometer throttles
* Type 2: 0-5V, current source, and three-wire pot throttles - wired
for single-ended operation
* Type 3: two-wire 0-5kΩ potentiometer throttles
* Type 4: 0–5V and three-wire pot throttles—wired for wigwag
operation
* Type 5: three-step switch throttles

* Ambient Operating Temperature Range: -40°C to 50°C
* Package environmental rating: IP53
* Dimensions: L164xW146xH56 mm
* Net Weight: 1.1 kg
* Regulatory compliance: * EMC emissions: EN50081-2/08.93
* EMC immunity: EN50082-2: 1995
* Safety, uncontrolled runaway: EN1175

Features Include:
* 60–200 amp AC induction motor controller
* MultiMode™ feature allows two distinct user-selectable operation modes
* Easily programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station
* Complete diagnostics through the programming devices and through the controller’s built-in Status LED
* Throttle input for single-ended or wigwag 5kΩ pots or 0–5V throttles (both standard full stroke and restricted range)
* Active precharge of controller capacitor bank extends life of main contactor tips
* Two hourmeters - total KSI-on hours and drive hours - and their associated maintenance timers are built into the controller,
with EEPROM storage (no battery)
* BDI calculations performed within controller
* Meets EEC fault detection requirements
* Fault detection circuitry on throttle inputs can be used to inhibit operation if throttle signal goes out of range for any
reason (applies both to the traction throttle and, in applications that include a proportional valve, to the hydraulic throttle
as well)
* Stall protection
* Internal reverse polarity protection (no external diode required)
* Continuous diagnostics during operation, with microprocessor power-on self-test
* All output drivers are short-circuit protected and provide built-in coil spike protection
* Positive battery connections for all inputs
* Fully protected inputs
* Internal and external watchdog circuits ensure proper software operation
* High environmental protection rating (IP53)
* 3-wire serial interface for multifunction display

CURTIS controller model 1230-2402 can also be used as the replacement of other 1230 controllers of lower current rates:
* 24V / 60A: 1230-2002 (one hour rating for 30A)
* 24V / 90A: 1230-2102 (one hour rating for 40A)
* 24V / 120A: 1230-2202 (one hour rating for 50A)
* 24V / 150A: 1230-2302 (one hour rating for 60A)

Model Number	1230-2402	Weight	2kg
Brand Name	Curtis	Operating voltage range	16-32V
Voltage	24V	Package environmental rating	IP53
Current	200A	Ambient Operating Temperature Range	-40°C to 50°C

related products

our factory

Our Company

Hefei Huanxin Technology Development Co., Ltd. has been devoting ourselves to developing and manufacturing and other since 2004.
We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We
have achieved great improvement since our company was founded in 2004.
We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support.

Packing & Delivery

Exhibition

FAQ

Q1. Can I have a sample order? A: Yes, we welcome sample order to test and check quality. Q2. What about the lead time? A: Sample needs 3-5 days. Q3. Do you have any MOQ limit? A: Low MOQ, 1pc for sample checking is available Q4. How do you ship the goods and how long does it take to arrive? A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional. Q5. How to proceed an order? A: Firstly let us know your requirements or application. Secondly We quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly We arrange the production. Q6. Is it OK to print my logo on the product? A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample. Q7: Do you offer guarantee for the products? A: Yes, we offer 1 year warranty to our products. Q8: How to deal with the faulty? A: Our products are produced in strict quality control system and the defective rate will be less than 0.2%

Please feel free to contact us if you have any problem!