Drying Machine, buy KODI FZG Type Pharmaceutical Vacuum Tray Dryer Vacuum Drying Oven on China Suppliers Mobile

Product Details

Product Description

Pharmaceutical Vacuum Tray Dryer Description
In the drying chamber, material will be dried under vacuum condition. Under the vacuum condition, the boiling point of material solution will reduce. It will increase impetus for heat and mass exchange. Therefore for certain heat exchange amount, it can save heat exchange area of evaporator
Material is under static condition during operation of the equipment, which is benefit for keeping initial status of material.
Intermittent operation can adjust process conditions at any time.
On the top of Pharmaceutical vacuum dryer, heating system is arranged to tackle the problem of return of condensed water, in addition, air suction is arranged at the side to improve drying efficiency.
This equipment can be used for low temperature drying and organic solvent recovery. Heat source can be steam, hot water and thermal oil. It is specially suitable for drying materials that is easily oxygenated during drying.

Vacuum Dryer Application
Pharmaceutical vacuum dryer is Suitable for drying of thermal sensitive materials easily resolved. Polymerized or deteriorated under higher temperature and it is wide used in pharmaceutical, chemical, foodstuff and electronic industries.

Details of Vacuum Drying Oven

Pharmaceutical Vacuum Drying Oven Features
1. It can get higher drying capacity at lower temperature and the heat energy can be used fully.
2. It is suitable for materials such as heat sensitive and easy oxidizable material.
3. It can dry raw materials that contain solvent and which needs to be recovered.
4. Before drying, it can carry out disinfectant treatment. During the period of drying, any impurity can not enter it.
5. The dryer belongs to static drying, materials will not be damaged.
6. The machine is a kind of batch type operation and can adjust technical process at any time.
7. The inner top is designed arch structure, it can effectively avoid the condensed water drop back.
8. Vacuumize from 4 points to one point, can guarantee uniform drying.

Pharmaceutical Vacuum Drying Oven Working Principle
It is well known that vacuum drying is to put raw material to the state of vacuum for heating and drying . if use vacuum to take air and humidity out, the dry speed will be faster.
Note: if use condenser, the solvent in raw material can be recovered. The condenser can be substituted by SK series water-ring vacuum pump or ZSWJ series hydropower spray vacuum pump unit if available.

Specification

Model Item	YZG-600	YZG-800	YZG-1000	YZG-1400
Inner size of drying chamber(mm)	600×976	800×1247	1000×1527	1400×2054
Outer size of drying chamber(mm)	1153×810×1020	1700×1045×1335	1693×1190×1500	2386×1657×1920
Layers of backing support	4	4	6	8
interval(mm)	81	82	102	102
Size of baking tray(mm)	310×600×45	520×410×45	520×410×45	460×640×45
Quantity of baking tray	4	8	12	32
Working pressure inside the pipe of baking support(MPa)	≤0.784	≤0.784	≤0.784	≤0.784
Temperature inside the chamber(°C)	≤150	≤150	≤150	≤150
Degree of vacuum inside the chamber when operation in idle, MPa	≤30
Under the vacuum condition of 30and110°C ,evaporation rate of water(kg/m2,h)	7.2
Model and power of vacuum pump when condenser is used(kw)	2X-15A 2kw	2X-30A 3kw	2X-15A 3kw	2X-70A 5.5kw
Weight of drying chamber(kg)	250		800	1000

Model Item	FZG-10	FZG-15	FZG-20
Inner size of drying chamber(mm)	1500×1060×1220	1500×1400×1220	1500×1800×1220
Outer size of drying chamber(mm)	1924×1720×1513	1513×1924×2060	1924×2500×1513
Layers of backing support	5	8	12
interval(mm)	122	122	122
Size of baking tray(mm)	460×640×45	460×640×45	460×640×45
Quantity of baking tray	20	32	48
Working pressure inside the pipe of baking support(MPa)	≤0.784	≤0.784	≤0.784
Temperature inside the chamber(°C)	≤150	≤150	≤150
Degree of vacuum inside the chamber when operation in idle, MPa	≤30
Under the vacuum condition of 30and110°C ,evaporation rate of water(kg/m2,h)	7.2
Model and power of vacuum pump when condenser is used(kw)	2X-70A 5.5kw	2X-70A 7.5kw	2X-70A 7.5kw
Weight of drying chamber(kg)		2100

Flow Chart of Pharmaceutical Vacuum Drying Oven

Successful Experience Overseas of KODI Pharmaceutical Vacuum Drying Oven
Pharmaceutical vacuum tray dryer has a very mature technology and process, and KODI company has rich overseas site installation experience and good after sale service .

Packing & Delivery

To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.

Company Profile

Why Choose KODI
* International high quality certification product chain
* Manufacturer, more reasonable price
* Solid technical support and after-sales service
* Uphold the principle of “Customer Supreme”( Balance payment after equipments run normally)
* Exports to more than 20 countries and regions, good customers feedback
* One-stop service, customized exclusive project feasibility report

About KODI

Changzhou KODI Machinery Co., Ltd. located in the birthplace of China drying equipment----Zhenglu Industrial Park, Changzhou City,Jiangsu Province which is 150km away from Shanghai city, with a comfortable environment and convenient transportation access.

KODI company is a professional manufacture of drying machine, which include Seaweed processing machine, Seaweed drying machine (Cottonii to carrageenan, Agar agar ), LPG Spray dryer, Pharmaceutical vacuum dryer/ vacuum drying oven / vacuum tray dryer, Industrial spin flash dryer, Flavor spray dryer (Cocoa, Maltdextrin,Gum Acacia), Lab Spray dryer, Spray drying equipment,Gelatin processing machinery, Gelatin drying machine (Hide and bone),Gelatin production line. we also deal in high-quality fermentation tank, Bright tank , Extraction tank, concentration tank , evaporator and etc..

We have implemented a strict and complete quality control system, which ensures that each product can meet quality requirements of customers. Besides, all of our products have been strictly inspected before shipment. Our products conform to international standards, such as CE, SGS.

KODI company also has a lot of top talent which have more than 15years of work experience, include research, design, manufacture and after sale service. Our products sell to all of the world (such as China, Australia, Malaysia, Indonesia, Vietnam, Philippines, Korea, Brazil, Chile, Peru, Argentina, Russia, Ukraine, South Africa, Cameroon, Sudan, Syria) and also have the good cooperation with the foreign client and vendor.

We are sure that our high quality products and excellent services will be appreciated by the growing list of satisfied customers. Contacting us is the first step to build a long and successful business relationship with us. Welcome!

Our Service

Pre-sale service
Act as a good adviser and assistant of clients to enable them get rich and generous returns on their investments.
1. Introduce the product to the customer in detail, answer the question raised by customer carefully;
2.Make plans for choice according to the needs and special requirements of users in different sectors;

Sale service
1. Ensure product with high quality and pre-commissioning before delivery;
2. Delivery on time;
3.Provide full set of documents as customer’s requirements.

After-sale service
Provide considerate services to minimize clients’ worries.
1.Assist clients to prepare for the first construction scheme;
2.Install and debug the equipment;
3.Train the first-line operators;
4. Examine the equipment;
5.Take initiative to eliminate the troubles rapidly;
6.Provide technical support;
7.Establish long-term and friendly relationship.

Service commitment
1. Provide clients one-year warranty to make sure the machine work well;
2.We always keep certain inventory level of spare parts, which means the replacements can be sent to you timely;
3.Send every client a preferential quotation.

FAQ

Special Notice:
In order to quota you the right YZG/ FZG vacuum dryer/ vacuum drying oven / vacuum tray dryer with best price, we would like to
get the following information include in your inquiry:
* -What is the raw material? Material related characteristic? Does it corrosive, strong basicity, or highly acid? Please confirm.
* -What is the capacity per hour you need (kg/h)?
* -What is the initial moisture and final moisture of finished products you require to get?
* -What about the maximum heat temperature of raw material?
* -What kind of fuel you use to heat the dryer? Natural gas, electricity, fuel oil or steam?
* -Which equipment material do you like prefer? SUS304, SUS316L or Carbon steel?
* -Provide us your country’s electricity information, such as phases, voltage, HZ?
* -How about dust collect requirements?
* -Other special requirements?

Frequently Asked Questions
Q: Can I visit your factory?
A: Yes. Many domestic and international customers visit our factory every year. Our company is near Shanghai.It only takes you about 1 hour to get Changzhou.Or we can visit you in Shanghai.

Q: What’s the quality of your products?
A:Parts of our products come with best quality, and our products passed CE certification, exported to lots countries around the world, such as Australia, Malaysia, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured with the quality absolutely.

Q: What to do if the machine has a problem?
A:24 hours timely response of mail and phone calls. If the parts broken belong to non-artificial factors within 12 months, we offer free replacement. If beyond 12 months, customers should bear the freight back and forth and accessories cost.

Q: How long is the warranty of your equipment?
A: Our warranty period is one year generally.

Q: What is your payment term?
A: Our usual payment term is: 30% TT in advance, 70% TT before shipment. Other ways can also be received after we both sides discussion and agreement.

Q: Does your price include freight?
A: Our usual price is based on FOB Shanghai, if you request CIF, please give us your delivery port, and we will give you CIF
price.