Air purification rotary Wheel Dehumidifier for industrial equipment

 

working principle
The dehumidification rotor of the rotary dehumidifier makes a 360° circular motion at a rate of 6-18rph in the box separated into the dehumidification zone and the regeneration zone. When the treated air to be dehumidified passes through the dehumidification zone, the moisture-absorbing material in the dehumidification rotor absorbs the air. When the runner area that absorbs water rotates to the regeneration area of the box, the water absorbed by the dehumidifying rotor is desorbed by the air heated by the regeneration heater and discharged to the outside, and the runner absorbs moisture. Simultaneous with desorption to ensure that the dehumidifier unit can provide stable dry air.
The company's combined rotary dehumidification unit combines the advantages of cooling and cooling at high temperature and high humidity, and high dehumidification energy efficiency ratio on the basis of single rotary dehumidification unit, to ensure that the temperature and humidity of the process environment can be guaranteed.

 

Temperature and humidity control area
1. Known conditions and refrigeration requirements:
1) Equipment overview: The drying equipment uses a combined rotary dehumidification unit, Sri Lanka;
2) Filtration level: The unit adopts the initial effect filter in the front section + the intermediate effect filter in the rear section;
3) Refrigeration method: customers provide 7-12° chilled water refrigeration;
4) Heating method: regenerative heating uses steam heating;
5) Installation method: floor installation;

The specific parameters are as follows:

Air volume	Air outlet humidity requirements
6000m³/h	Less than 8g/kg

 

Unit performance parameter table:
1. Unit performance table