DP200 plastic cement screw stirring paddle horizontal ribbon blender/Powder Mixer/mixing machine

 

 

 Descriptive abstract

 

The Horizontal Ribbon Mixer consist of U-Shape tank, spiral and drive parts. The spiral is dual structure. Outer spiral make the material move from the sides to the center of the tank and the inner screw conveyor the material from the center to the sides to get the convective mixing. Our DP series Ribbon mixer can mix many kinds material especially for the powder and granular which with stick or cohesion character, or add a little liquid and paste material into powder and granular material. The mixture effect is high. The cover of the tank can be made as open in order to cleaning and change parts easily.

 Main features

 

DP series mixer with Horizontal tank , single shaft with dual spiral symmetry circle structure.

The top cover of the U Shape tank has the entrance for material. It can be also designed with spray or add liquid device according the customer’s needs. Inside the tank there equipped the axes rotor which consist of, corss support and spiral ribbon.

 

Under the bottom of the tank, there has a flap dome valve (pneumatic control or manual control) of the center. The valve is arc design that assure no material deposit and without no dead angle when mixing. Reliable regula- seal prohibit the leakage between the frequent close and open.

 

The discon-nexion ribbon of the mixer can make the material mixed with more high speed and uniformity in short time.

 

This mixer also can be designed with the function to keep cold or heat. Add one layer outside the tank and put into medium into the interlayer to get the mixing material cold or heat. Usually use water for cool and hot steam or use electrical for heat

 

 Main Technical Date

Model	DP-200
Effective Volume	200L
Fully Volume	284L
Turning Speed	46rpm
Total Weight	250kg
Total Power	4kw
Length(TL)	1370
Width(TW)	834
Height(TH)	1647
Length(BL)	888
Width(BW)	554
Height(BH)	637
(R)	277
Power Supply	3P AC208-415V 50/60Hz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 Deploy List

No.	Name	Model Specification	PRODUCING AREA,Brand
1	Stainless steel	SUS304	China
2	Motor		Taiwan TECO
3	Reducer		Taiwan Yu Sin
4	Electromagnetic valve		Taiwan SHAKO
5	Cylinder		Taiwan Airtac
6	Switch		Wenzhou Cansen
7	Circuit breaker		Schneider
8	Emergency switch		Schneider
9	Switch		Schneider
10	Contactor	CJX2   1210	Wenzhou CHINT
11	Assist contactor		Wenzhou CHINT
12	Heat relay	NR2-25	Wenzhou CHINT
13	Relay	MY2NJ  24DC	Japan Omron
14	Timer relay		Japan Fuji