High Pressure H2 Hydrogen Generator
Negotiable /Piece
Min.Order:1 Piece
Xi'an Taikang Biotechnology Co.,Ltd
Ⅰ. Usage overview:
TK series high pressure hydrogen generator is a compact high pressure hydrogen generator, adopting PEM electrolysis water hydrogen production technology, directly electrolysis of ultrapure water, no need for booster pump, after multi-stage drying, to get high pressure high purity hydrogen gas. The generator is built-in parallel dual electrical system, the system operates independently to ensure the safety of equipment operation.
Ⅱ. Main features:
1. Electrolysis of water to produce hydrogen, on-demand production, hydrogen purity of 99.999%.
2. Maximum 10 MPa working pressure, replacing the laboratory high-pressure hydrogen cylinder.
3. According to the use of the need to set the upper pressure limit value, to extend the service life of the electrolytic cell
4. Non-contact high sensitivity liquid level detection, to achieve water shortage alarm, to avoid damage to the electrolytic cell due to low water level.
5. Built-in high sensitivity hydrogen sensor, if hydrogen leakage, the software prompts and beeps the alarm.
Ⅲ. Flow Chart
Ⅳ. Main technical parameters.
Model | TK-3300H | TK-7300H | TK-7500H | TK-100K | TK-100KPLUS |
Hydrogen purity | 99.999% | ||||
Hydrogen flow | 0-320ml/min | 0-320ml/min | 0-500ml/min | 0-1000ml/min | 0-1000ml/min |
output pressure | 0-3Mpa | 0-7Mpa | 0-10Mpa | ||
Volume of water loaded | 0.5-1.6L | 1-3.2L | |||
Water quality requirements | Deionised/secondary distilled water, conductivity≤0.2μS/cm | ||||
pressure stability | <0.001Mpa | ||||
Voltage | 220V±10%,50Hz or 110V | ||||
Power | 160W | 280w | 550W | ||
Environmental requirements | 5-40℃ <80%RH | ||||
Recommended Environment | laboratory hoods | ||||
Outlet parameters | 316 stainless steel tube OD1/8” | ||||
Dimensions: (D*W*H, mm) | 420*260*440 | 520*300*520 |