Solid Preparation & Filling Machine, buy HA120-50-01 co2 extraction machine for essential oil production on China Suppliers Mobile

Product Details

Product Description

Supercritical carbon dioxide extraction equipment

The technology of SFE(Supercritical Fluid Extraction) is a new subject from Modern Chemicals Industries, which is one of the advanced Separation Technology. As for SCF(Supercritical Fluid), it is was that fluid on Critical Point(Pc, Tc) under
Thermodynamic State, the Critical Point is the state point when interface of Gas and Liquid disappear, which process very novel physical& chemical characters. It density degree close to liquid, viscosity degree close to gas, but bigger diffusion coefficient &dielectric constant, smaller viscosity etc. these characters have contributed to good separation effects. So the SFE is mainly about Separation, the solution will touch with extracted materials under High Pressure& Suitable Temperature, the Solutes would be diffused into the solution, then change the operation Conditions, to make the Solutes separate out.

Characteristics of the Super Critical CO2fluid：

1. Low Critical temperaturesuitable for extraction and purification of heat sensitive compound.
2. Being capable to provide inert environment to avoid oxidation of products and affection of effectivecontent of extracts.
3. Fast extraction speed, no toxicity, non-flammable, safe application and no pollution upon Environment.
4. No residue of solvent, no nitrate and ions of heavy metal.

Details Images

Features:
1.Easy to operate and adjust;
2.Well selectivity. Can extract out requested component according to control pressure and temperature.
3.Low operating temperature. Operation often happen under room temperature, which is much better for Heat-sensitive Materials. Because during extraction process, it has avoid “when oxygen oxygenation” and “when light reaction”, product can keep its natural tastes.
4.Finish within one step, CO2 won’t be left on the products.
5.CO2 is one kind gas of non-poisonous, tasteless, inflammable, cheap and can be cycle use.
6.Quick extraction speed.

Specification

Model	HA120-50-01
Max. extract pressure	50MPa
Single extract cylinder volume	1L
Extraction temperature	Room temp – 75℃
Max. flow	0-50L/h(adjustable)
Kettle material	1Cr18Ni9Ti
Separation kettle volume	600ml * 2sets
Separation kettle pressure	30MPa
CO2 store tank volume	3L
CO2 store tank pressure	16MPa
Dimension	170015201000mm
Weight	300KG(Approximate)

Super Critical CO2 Extraction Device

NO	MAIN CONFIGURATION	PARAMETER
1	Extraction Kettle	1L, 2L, 5L/50Mpa, 10L, 24L/40Mpa, 50-200L/32Mpa, Dual purpose for solid and liquid, equipped with water jacket for circulated heating with adjustable temperature.
2	Separation Kettle	0.3-10L/Mpa, 50-100L/16-22Mpa, Equipped with water jacket for circulated heating with adjustable temperature.
3	Fine Distillation Column	inner diameter 25X2-3m/30Mpa,35X2-3m/30Mpa, 48X4-6m/30Mpa, 78X4-6m/30Mpa According to technological requirement, 4-section, 6-section or 8-section temperature control are available and relative stuffing can be selected and loaded by customer according to technological requirement.
4	High Pressure Pump	20L/40Mpa.h double-plunger, 50L/50Mpa.h double-plunger frequency-modulating, 400L/40Mpa.h three-plunger frequency-modulating, 800l/40Mpa.h three-plunger frequency-modulating, the pump head application.
5	Take Pump	in the course of extraction, the entraner is used to change polarities of CO2 so as to extend range of application.
6	Cooling System	equipped with semi-sealed or full-sealed compressor to meet technological requirement.
7	Heat Exchange and Temperature Control System	according to technological requirement, the heat exchange and temperature control system are equipped for extraction kettle, separtion kettle and fine distillation column respectively to control the temperature of water circulation at -85℃ and the temperature pf oil circulation at -150℃; the digital display double-screen is used to control the temperature of water bath and to measure the temperature of CO2 fluid with accuracy of temperatire control at ±1℃.
8	Pressure Control (Protection)	equipped with the electro connecting pressure gauge at the outlet of the high pressure pump and set the working prssure to release pressure and make automatic protection in case overpressure occurs; equipped with safety valves for high pressure pump, extraction kettle, separtio kettle, fine distillation column according to their maximum working pressure to release pressure and make automatic protection in case overpressure occurs; equipped with back-pressure valve system at the outlet of the extraction kettle which has stable pressure and is easy to make adjustment. The control accuracy of pressure (dynamic) is ± 0.1MPa.
9	Display of Flow	the metal rotor flow meter with remote transferable digital display for instant flow and accumulated flow respectively.
10	Pipelines	all containers, valves, pipe fittings and pipelines contacting with fluid are all made of stainless steel.
11	Others	three-phase-four-wire power supply with 380V/50Hz and CO2 with foodstuff grade ≥99.5% are prepared by customer itself.

Compared with other models

Model	Extraction Capacity	Pressure	Combined Type	Dimension(mm)
HA 120-50-01	1L	50Mpa	one extracting pot-two separating pot	260026001800
HA 120-50-05	5L	50Mpa	one extracting pot-two separating pots-one column	260026001800
HA 120-50-10	10L	50Mpa	one extracting pot-two separating pots-one column	320026001800
HA 120-50-20	10L*2	50Mpa	one extracting pot-two separating pots-one column	320026001800
HA 120-50-48	24L*2	50Mpa	two extracting pot-two separating pots-one column	550035004500
HA 120-50-100	50L*2	50Mpa	two extracting pot-two separating pots-one column	600060004500