Product Details

DescriptionOverview

The integrate EOC Master have two EOC master module and one ONU module.EOC Master can provide high speed data service based on coaxial cable network. BD-2EOC-ONU built in a ONU. The module supports IEEE 802.3ah standards. It provide one SC/PC optical EPON uplink port and two 10/100/1000M auto-negotiable Ethernet RJ45 ports. By using the EPON technology, the ONU Module can provide a high-speed data channel through a single optical fiber with a rate of 1.25 Gbit/s on bi-direction. In addition, it offers the QOS, flexible bandwidth allocated to provide quality high-speed data service, voice service, and video service.

The EOC Master Module is based the AR7410 chipset solution，with high anti jamming capability OFDM technology. The 7.5-65MHz low frequency band is used for EOC signals. Built in high isolation filter as CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87~862MHz can run on one cable without interference. The EOC Master can provide high speed data service. The PHY Layer speed is 600Mbps, the MAC Layer throughput is up to 320Mpbs.

The ONU module connects with the EOC module, Ethernet data signals will be modulated into RF signals to transmit in the coaxial cable. BD-2EOC-ONU integrating EOC and ONU can reduce the number of active node, decreasing failure rate and saving a space. It is the best choice of EPON+EOC solution for the operator.

Function Features

High integration with two EOC Master modules and one ONU module
Aluminum alloy die casting shaping, good heat dissipation
Outdoor waterproof designed, 60V/220V power supply optional
7.5-65Mhz frequency for EOC signals., no influence on CATV Service
Support data encryption
Support broadcast storm limitation
Support data packet statistics
Support auto-update and auto-configuration
Support Dynamic Bandwidth Allocation (DBA)
Support ONU auto-discovery/Link detection/remote upgrade of software
Support Port-based VLAN and IEEE802.1Q VLAN
Support performance statistics based on ports
Support ACL achieve the purposes of access control
Support various LLID configuration and single LLID configuration. Different user and different service could provide different QOS by means of different LLID channels
EMS network management based on SNMP

Specification

Item	Parameters	Specification
Specification of EOC Module
Interface and LED Indicator	RF Port	1*EOC low-frequency signal output port, support F- Female or SMB connector
	Ethernet Port	2*2 10/100/1000Mauto-negotiation, RJ45
	LED Indicator	21 for Power Supply Status21 CABLE Link Status indicator 2*2 for Ethernet Ports Status
Performance Parameters	RF Parameters	Frequency Band :7.5-65MHzRF Output Level:110±5dBuv Receive sensitivity:45dBuv Return Loss:>16dB Output Resistance:75Ω
	Transmission	PHY Layer:600MbpsThroughput on MAC Layer:320Mbps
	Modulation Mode	OFDM– 2690-carriers 4096/1024/256/64/16/8-QAM, QPSK, BPSK, ROBO
	Working Mode	TDMA/CSMA
	Encryption Mode	AES-128
Standard	EOC Standard	IEEE P1901(Draft)HomePlug AV
Standard	Ethernet Standard	IEEE 802.3, IEEE 802.3x, IEEE 802.3uIEEE802.1P, IEEE802.1Q
Software	Network Management	WEB, CLI, SNMP
Software	Software Features	VLAN, QOS, Bandwidth Control, Broadcast storm limitation
Specification of ONU Module
Interface	PON Interface	One EPON portMeet 1000BASE-PX20+ standard Up to 1.25Gbps Upstream and Down-stream SC Connector Single-mode fiber, single-strand Maximum split ratio 1:64 Up to 20Km distance @ 1:32
Interface	Ethernet Interface	Two 10/100/1000Mauto-negotiationFull/Half-Duplex RJ45 type connector , Auto MDI/MDI-X Up to 100m distance
Performance Parameters	PON Optical Parameters	Wavelength: Upsteam1310nm, Downstream 1490nmTransmitter Optical Power: 0～4dBm Optical Receive Sensitivity: -27dBm Saturation Optical Power：-3dBm
	Data Transfer Parameters	Data Transfer Rate: Upstream 900Mbps；Downstream 950MbpsLAN Interface: 1000Mbps Packet Loss：<1*10E-12 latency：<1.5ms
	Business Capability	Layer 2 wire speed switchingSupport VLAN TAG/UNTAG，VLAN conversion Support Port-based speed limitation Support Priority classification Support storm control of broadcast
Network Management	Management Mode	Support IEEE802.3 QAM, ONU can be remotely managed by OLTSupport Remote management through SNMP and Telnet Local management
Network Management	Function	Status monitor, Configuration management, Alarm management, Log management
Indicator	Indicator Description	PWR: Power up or downLOS: Optical Link Status PON：ONU registered LNK: Link Status
Physical Features
Physical Features	Power supply & Consumption	Power Supply：220V/60V optionalConsumption：<17W
	Size & Net weight	Dimension：290×220×120mmWeight：3.5kg
	Environment Attribute	Working Temperature：－10～65℃Storage Temperature：-40～85℃ Working humidity：10%～85%non-condensing Storage humidity：10%～90% non-condensing