8Channel Voice(FXS/FXO) Phone over Fiber Multiplexer
USD $200 - $200 /Unit
Min.Order:1 Unit
Shanghai Baudcom Communication Device Co.,Ltd
The voice over fiber multiplexer is point to point fiber transmitting equipment, which realizes 1~8 channel voice (FXO, FXS) POTs phone over fiber and 4 E1,4*100M Ethernet, 4 channel RS232 for option. Its merits include complete warning function, high integration, low consumption, stable performance and convenient usage.
Features
provides 4 channel E1/ G.703 for option;
provides 1 channel 100M (liner) Ethernet ports for option
provides 8 channel voice port, FXO and FXS for option; also for 2/4 wire E&M
provides 4 channel RS232, rate supports 300-15200 bps for option;
Ethernet port 10/100M, full/half duplex auto-adaptable and supports VLAN;
Ethernet port supports AUTO-MDIX (twisted cable and straight cable auto-adaptable);
1-8 channel voice connection, supports calling indication;
Configuration: point to point;
Voice port supports O port and S port or E&M interface for order, O port connects switch and S port connects user’s phone;
Optical interface supports SC/FC interface and supports single fiber interface
Optical interface Optical wavelength: single mode 1310nm/1550nm Fiber: single fiber or double fiber for option Transmitting consumption: -9dBm/-5dBm Transmission range: 0-50Km/120Km for option Optical interface: SC/FC Receiving and dispatching module: >-6dBm Optical receiver receiving sensitivity <-36 dBm (BER<10-11) Fiber circuit code: NRZ code Ethernet Interface Rate: 10/100M, full/duplex auto-negotiation Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN) MAC Address Entiries: 4096 Entiries Total Memory Sizes: 64MBits SDRAM Physical interface: RJ45, support AUTO-MDIX FXS: Alarm voltage: 75V Alarmf requency: 25HZ 2 line input impedance: 600Ω (hanging off) Wastage: 40db FXO: Alarm detecting voltage: 35V Alarm detecting frequency: 17HZ-60HZ 2 line input impedance: 600Ω (hanging off) Wastage: 40db E wire: Max current: 22mA Saturation voltage: 3V Dial speed: >20pps M wire: steady current: 7 mA min test current: 5 mA pluse dial recognition: >20pps RS232 port Rate: 300-115.2Kbps auto-adaptable (Asynchronous) Interface characteristic: satisfies ITU-T V.24 Dimension(19inch rackmount) ² 433mm(L) ² 138mm(W) ² 44mm(H) Power supply working voltage range wide, good anti-disturb and Isolation, work stable option I – DC-48V,range DC-36V~DC-72C option II – AC220V,range AC165V~AC240V Power Consumption: <=3 Watts Environment condition Operating temperature: 0C~+50 C Storage temperature: -20 C~+70 C Relative temperature:95% (uncondensed)
Voice Phone Interface: