Name: Manual mounting press Metallographic instrument
Brand: Serve Real
Availability: InStock

Wuxi Serve Real Technology Co., Ltd.

Credit Member 5 years

Business license

Business Type: Manufacturer

Wuxi Jiangsu China

Main Products: Concrete & Cement test equipments ,Road & Traffic test equipments ,Asphalt Testing Instruments ,Material testing machines ,Geotechnical test equipments ,Geotextiles test equipments ,Aggregate and rock test equipments ,Building material test equipment ,Petroleum and drilling fluids instrument ,Fabrics and textiles test equipments ,Flammability chambers ,General Lab equipments

View more products Contact Supplier

Product Details

Model: XQ-2B

This machine is suitable for small, difficult to handle or irregular metallographic and petrographic samples for inlaying before grinding and polishing. After inlaying, it is convenient to grind and polish the sample; at the same time, it is also beneficial to observe the material structure of the sample under the metallographic microscope, and test the hardness of the sample on the hardness tester.

Working conditions

1. The altitude is not higher than 1000m.

2. The ambient medium temperature should not be higher than +40℃ and not lower than -10℃.

3. The relative humidity of the air is not more than 85% (at 20°C).

4. There is no conductive dust, explosive gas, and corrosive gas that can seriously damage metals and insulators.

5. There is no obvious vibration and bump.

Specifications

Sample pressing diameter	Φ22, Φ30, Φ45mm, choose when ordering
Temperature control range	0-300℃
Net weight	33kg
Timing range	0-30min
Heater	AC 220V/50Hz/400W
Dimensions	400mm×290mm×400mm

Configurations

Host	1 set
Power cable	1
Inlay powder	1 pack (500g)
Technical documents	1 copy of instruction manual, certificate of conformity and warranty card