KILL MANIFOLD

 1.Application 

 In case of increase of the well head pressure,the kill manifold can provide a means of pumping heavy drilling fluid into the well to balance bottom hole pressure so that well kick and blowout can be prevented.In this case,the increasing well head pressure also can be released directly through blowdown lines connected to the kill manifold so as to release bottom hole pressure,or the water and extinguishing agent can be injected into the well using the kill manifold.The check valves on the kill manifold only allow injection of kill fluid or other fluids into the well bore through themselves,but do not allow any backflow so as to perform the kill operation or other operations.

2. Configuration
The kill manifold consists of check valves, gate vales, pressure gauges and line pipes. The one end of the kill manifold is connected to the drilling spool and the other end is connected to the pump. The kill manifold and choke manifold are both designed to API 16C and can be used together. The kill manifold is available in pressure ratings of 14MPa, 21MPa, 35MPa and 70MPa.

 Honorary Ceitificate

Our products have been ISO9001 certified and attained API 6A,6D,API 7,7K,and API 16A&16C approvals of American Petroleum Institute.All products are fully designed and manufactured in accordance with API,ANSI,GB(national standance)and SY(industry standards)standards.