ADL5920 VSWR Meter 9KHz-7GHz Bidirectional RMS & VSWR Detector Module

 

Description:
The ADL5920 is an ultrawideband, bidirectional detector that simultaneously measures forward and reverse rms power levels in a signal path, along with the return loss.

The forward and reverse power traveling through the integrated bidirectional bridge is measured using two 50 dB linear in dB rms detectors. The detector output voltages, available at the VRMSF and VRMSR pins, are proportional to the forward and reflected power in dBm. A third, differential, output produces a voltage proportional to the return loss (reflection coefficient) in dB, closely related to the voltage standing wave ratio (VSWR). The common-mode level of this output is externally adjustable through the VOCM pin.

The primary transmission line of the bidirectional bridge, from RFIN to RFOUT (or vice versa) is dc-coupled and allows small amounts of dc bias current through the bridge. When dc-coupled to source and load, the positive and negative supply pins of the ADL5920 must be connected to +5 V and −2.5 V, respectively (relative to the dc voltage at RFIN and RFOUT). The internal detector circuitry is also dc-coupled to the directional bridge to support measurements down to 9 kHz.

The maximum input signal on each of the RF ports (RFIN and RFOOUT) is 30 dBm for open and shorted terminations and 33 dBm for a matched termination.

The ADL5920 draws 160 mA from a 5 V supply and has a low power, power-down mode controlled through the PWDN/TADJS pin.

Applications:
- Broadband online power and return loss measurements
- Transmit power control and automatic level control in wireless transmitters, signal generators, network analyzers, and wireless communications testers
- Stateful monitoring of system modules, cables and connectors

Core Chip Features:
- Wideband matched 9 kHz to 7 GHz operation
- Forward and reverse power and return loss measurement
- 49 dB ±1.0 dB input range with −19 dBm minimum input level, ±1.0 dB linear rms (crest factor sensitive) output at 1 GHz
- Insertion Loss: 1.1 dB at 1 GHz and 1.9 dB at 6 GHz
- Input & Output Return Loss & VSWR
  1 GHz: 22 dB/1.16:1
  3 GHz: 14 dB/1.5:1
  6 GHz: 12 dB/1.7:1
- Output IP3: 70.5 dBm at 1 GHz
- Directivity:
   20 dB at 1 GHz
  13 dB at 3 GHz
   5 dB at 6 GHz
- Maximum Input Power:
  30 dBm for open or shorted termination
  33 dBm for matched termination

Module Parameters:
- Operating Frequency: 9 kHz to 7 GHz
- Size: 3.5 x 4cm (Without the size of SMA)
- Power Supply: +7 to +10V (With LDO chip, voltage regulator gets 5V to power the chip)
- Reserve 6 SMA interfaces, including RF input, RF output, forward power, reverse power, differential + power, differential-power.

Package Included:
- 1 x ADL5920 Detection Module

 

Detail photo

 

FAQ 

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality.

 

Q2. What about the lead time?

A: Sample ususally take within 3 working days.

 

Q3. Do you have any MOQ (minimum order quality)limit?

A: For standard product, usually 1pcs/item. For the OEM order, MOQ at least 50pcs/item.

 

 

Q4. How to proceed an order?

A: After buyer confirm the product&price is ok and ready to buy, order will be please tell us your delivery address, phone number, sometimes need email. Then we can draft the order and it will have a alibaba paying link.

 

Q5. After paid, what info of the supplier provided?

 

A: Tracking number

 

Q6: Do you offer guarantee and after-service for the products?

A: Yes, 6- 12 months warranty for our products. Note: We will do not take the responsibility for Man-made damage or improper operation. Delivery demage will be negotiate.

 

 

Packing and Shipping

Package: Normally we use the standard paper package to export worldwide.

 

Shipping : 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier  we are co-operating at present.

 

2. By chinese small parcel, usually for the customer to save the cost. But Chinese small parcel have the risk for lost parcel. Note: If we got the parcel back, we only can refund the item cost. If we didn't get the parcel,then sorry we can't refund any.

3. By Air: Delivery from the Shenzhen airport to customers’ destination city air port.

4. By Sea: Delivery from the Shenzhen sea port .

 

Company information

TZT has been speciliazing in Business & Industry,Hobbies & Toys,CNC Products and Health care supplies for over 5 years.We committed to enhance customer satisfaction by continually improving the process with a vision of expertise in the field. 
Aiming to provide high quanlity products and great service for buyer,we are strict on product quanlity control and offer instant communication service.Welcome to contact us!

Our Advantages:
-  Source only the best consumer goods and ensure the highest quality.
-  Streamline the buying and payment process, and make it as easy as possible.
-  Help the customers all over the world discover products and manufacturers in China.
-  The Shortest order processed time and speed delivery