JUNTEK PSG9080 Programmable Arbitrary Generator 1nHz-80MHz Function Generator Pulse Generator
Negotiable
Min.Order:1
Log Periodic Antenna 0.6-10GHz Antenna Spectrum Analyzer Signal Analysis Position EMC Antenna
10Hz~1GHz Dedicated Spectrum Analyzer Antenna with 2.15~3.0DB Gain Dual Purpose RFN/BNC Interface
700KHz~3.0GHz Omni Directional Antenna Dedicated Spectrum Analyzer Antenna with SWR
0.1-600MHz HF/VHF/UHF ANT SWR Antenna Analyzer Meter Frequency Sweep + Battery
Description:
PSG9080 is a programmable function/arbitrary wave signal generator. It can output sine wave, square wave, triangle wave, pulse wave, and arbitrary wave, etc. The frequency range of the instrument is up to 80MHz, with Waveform modulation, frequency sweep, VCO, measurement signal frequency and programming functions, etc. It can simultaneously display output signals, amplitude, phase, duty cycle and frequency. Provide new options for education, research and development, production, testing and other industries.
The instrument is exquisite in appearance and equipped with a 3.5-inch high-resolution color LCD screen to bring a new visual experience.
Seven Functions:
- Function generator
- Arbitrary waveform generator
- Pulse generator
- Noise generator
- Frequency meter
- Counter
- Frequency scanner
Technical Parameters:
- Model: PSG9080
- Channel: 2
- Maximum frequency of sine wave: 80MHz
- Sampling Rate: 300MSa/S
General Specifications:
Display:
- Screen: 3.5 inch TFT color LCD display
- Resolution: 320*480
- Color: 64K true color
Store and Load:
- Quantity: 100 groups
- Location: 00 to 99 (The data of 00 storage location is loaded by default)
Interface:
- Interface method: USB to serial interface
- Extension interface: Serial port with TTL level mode, convenient for secondary development
- Communication rate: Standard 115200bps
- Protocol: Using the command line, the protocol is open
Power Supply:
- AC power: Supply voltage: 85V-264V, 47-63Hz
- Power consumption: Less than 30W
- Fuse: 250VAC,T3. 15A
- DC power: Supply voltage/current: DC5V±0.5V 3A
Environment:
- Temperature : 0~40℃
- Humidity: Humidity<80%
Machine Size:
- Size: 247 x 243 x 402 mm (LxWxH)
- N.W.: 950g
Waveform Characteristics:
- Wave length: 8192 points/channel
- Waveform vertical resolution: 14 bits
- Waveform type: Sine wave, square wave, pulse wave (duty cycle, pulse width and cycle time can be accurately set), triangle wave, rising saw-tooth wave, falling saw-tooth wave, CMOS wave, DC level, half wave, full wave, positive step wave, inverse step wave, exponential rise, exponential fall, Lorentz pulse wave, muti-sound wave, random noise wave, trapezoidal pulse wave, sink pulse wave, amplitude modulation waveform, frequency modulation waveform and 99 groups of user-defined wave-forms.
Frequency Characteristics:
- Sine wave frequency range: 1nHz-80MHz
- Square wave frequency range: 1nHz-30MHz
- Triangle wave frequency range: 1nHz-50MHz
- Pulse wave frequency range: 1nHz-30MHz
- TTL digital wave frequency range: 1nHz-20MHz
- Arbitrary wave frequency range: 1nHz-50MHz
- Pulse width adjustment range: 5nS~4S
- Pulse period adjustment range: 10nS~40S
- Frequency minimum resolution: 1nHz
- Frequency accuracy: ±5ppm 0 to 50℃
- Frequency stability: ±3ppm per 1 year
Sine Wave Spectral Purity:
- Total harmonic distortion: ≤0.5% (at 1kHz, 5Vpp)
Signal Characteristics:
Square Wave:
- Rising/falling edge time: ≤10nS
- Overshoot: ≤10%
- Asymmetry: ≤0.1%
Ramp and Triangle Wave:
- Linearity: ≤1% (less than 1MHz)
- Asymmetry: ≤1% (less than 1MHz)
Pulse Wave:
- Pulse Width: 5nS~4S
- Pulse period: 10nS~40S
- Duty cycle: 0.01%-99.99%
- Rising/falling edge: ≤10nS
- Overshoot: ≤10%
Arbitrary Wave:
- Wave length: 8192 points (8K points)
- Vertical resolution: 14 bits
- Minimum rise/fall time: ≤10nS
- Overshoot: ≤10%
- Arbitrary waveform non-volatile storage number: 99
Output Characteristics:
Amplitude:
- Amplitude range:
Frequency≤1MHz, 2mVpp~25Vpp;
1MHz≤Frequency<11MHz, 2mVpp~10Vpp;
11MHz≤Frequency<60MHz, 2mVpp~5Vpp;
60MHz≤Frequency<80MHz, 2mVpp~3.6Vpp.
- Amplitude resolution: 1mVpp
- Amplitude stability: ± 1% ±1 mVpp (at 1 kHz, >10 mVpp)
- Amplitude flatness:
±1% (0.1dB)<10MHz;
±2% (0.2dB)<10MHz~50MHz;
±10% (0.9dB)<50MHz~70MHz;
±20% (1.9dB)<70MHz~80MHz.
DC Bias:
- Offset adjustment range: -9.99V to 15.00V
- Offset resolution: 0.01V
Phase Characteristics:
- Phase adjustment range: 0° to 359.9°
- Phase resolution: 0.1°
Waveform Output:
- Output impedance: 50Ω (typical)
- Protection: Short circuit protection
PWM:
- Carrier wave: Pulse wave
- Wave inversion: Regular and reverse
- Pulse period: 0.01uS to 40S
- Pulse Width: 0.001uS to 4S
Burst:
- Idle: Zero position, positive maximum, negative maximum
- Mode: Single, automatic
- Trigger source: Manual burst, CH2 burst, external burst (AC), external burst (DC)
- Pulse number: 1-1000000000
Measurement and Counting Function:
Measurement Mode:
- Measurement function: Frequency, positive and negative pulse width, period, duty cycle
- Coupling method: DC, AC
- Gate time: 0.001S-10.000S
- Measurement mode: Low frequency, high frequency
- Frequency measurement range: 1Hz~100MHz
- Input signal amplitude range: 2Vpp~20Vpp
- Period measurement: 10nS~4S
- Pulse Width: 4S
- Duty cycle measurement range: 0.01%~99.99%
Counter mode:
- Counter range: 0-4294967295
- Coupling method: DC and AC coupling
- Counting method: Manual
External Modulation Input Characteristics:
- Input signal amplitude range: 0~3Vpp
- Input signal frequency range: DC~200kHz
Scanning Characteristics:
- Sweep channel: CH1 or CH2
- Carrier wave: Sine wave, square wave, saw-tooth wave, arbitrary wave (except DC)
- Sweep function: Sweep frequency, sweep amplitude, sweep duty
- Sweep mode: Linear, logarithmic
- Sweep direction: Increment, decrement, round trip
- Start/end frequency: Consistent with the upper and lower limits of the corresponding carrier frequency
- Start/end amplitude: Consistent with the upper and lower limits of the corresponding carrier amplitude
- Start/end duty cycle: Consistent with the upper and lower limits of the corresponding carrier duty cycle
- Sweep time: 0.01S-640S
Voltage Control Characteristics:
- Voltage control channel: CH1 or CH2
- Carrier wave: Sine wave, square wave, saw-tooth wave, arbitrary wave (except DC)
- Voltage-control function: Frequency control, amplitude control, and duty cycle control
- Sweep mode: Linear, logarithmic
- Start/end frequency: Consistent with the upper and lower limits of the corresponding carrier frequency
- Start/end amplitude: Consistent with the upper and lower limits of the corresponding carrier amplitude
- Start/end duty cycle: Consistent with the upper and lower limits of the corresponding carrier duty cycle
- Voltage-control voltage range: 0V-5V, starting point and end point can be set arbitrarily
Programming Features:
- Running mode: Debugging, normal
- Storage: P00-P19 (20pcs)
- Programming number: 00-99
- Programming time: Single serial number programming time 0-99S
Package: Normally we use the standard exporting packaging. We also can according to clients' request .
Shipping :
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier we are co-operating at present.
2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.
3. By Sea: Delivery from the Shanghai sea port .
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Samples arrived often need 3-5 days.
Q3. Do you have any MOQ (minimum order quality)limit?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.
Q5. How to proceed an order?
A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.
Q6. Is it acceptable to print my logo on the product?
A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer one-year warranty for our products.
Q8: How to deal with the flaw?
A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%
Please do not hesitate to contact me if you need any further information
Whatsapp/Tel/Wechat: 8619902906050
Web:
Address: Room 303 Building 2,Youpin Cultural and Creative Park,Zhangkeng,Minzhi Street,Longhua District,518131,Shenzhen,China(Mainland)