Unassembled 1.8-50MHz 100W ATU-100 Automatic Antenna Tuner Kit with 0.96-Inch OLED Display

 Description:
This antenna tuner ATU-100 is an automatic tuning antenna. When installing and using it, please try to use a short coaxial cable to connect the short wave machine to the end of the antenna; use the out port to connect your antenna. When the ATU-100 detects that the tuned transmit power is reached and the standing wave value is greater than 1.3, the tuning can be started, and after the tuning is completed (within the ability of ATU-100, if your antenna is not well matched, it will not be able to be reduced below 1.3, please adjust the antenna), you can perform high-power communication test. The finished board comes with a 128*64 OLED display screen, which takes into account power saving and display font coordination; please pay attention to the consistency of the data cable (dat clk) when installing the screen.

Technical Parameters:
- Allowable supply voltage range: 10-15V DC
- Maximum current consumption: 400mA
- Maximum working power: 100W
- Maximum measurable power: 150W
- Start to input tuning power: 5W (10W or more is recommended, and the maximum should not exceed 30W)
- Minimum measurable power: 0.1W
- Power measurement accuracy: 10%
- Minimum load inductance value 0.05μh
- Maximum load inductance value: 8.53μh
- Minimum load capacitance: 10pf
- Maximum load capacitance value: 1869pf

Other detailed technical parameters and schematic diagrams, documents, pcb source files and firmware can be downloaded from the following site:
/Dfinitski/N7DDC-ATU-100-mini-and-extended-boards/tree/master/ATU_100_EXT_board

Package List:
- 1 x Set of Automatic Antenna Tuner

Note:
- Assembling is needed.
- It is a network open source project; we provide a test and modification platform for ham without DIY conditions (or you are unwilling to solder by yourself).
- Firmware V3.0 has been written for pic16f1938i/ss.

Package: Normally we use the standard exporting packaging. We also can according to clients' request .

 Shipping : 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier  we are co-operating at present.

2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.

3. By Sea: Delivery from the Shanghai sea port .

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

A: Samples arrived often need 3-5 days.

Q3. Do you have any MOQ (minimum order quality)limit?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?

A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.

Q5. How to proceed an order?

A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.

Q6. Is it acceptable to print my logo on the product?

A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?

A: Yes, we offer one-year warranty for our products.

Q8: How to deal with the flaw?

A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%

Please do not hesitate to contact me if you need any further information

Whatsapp/Tel/Wechat: 8619902906050

Web: 

Address: Room 303 Building 2,Youpin Cultural and Creative Park,Zhangkeng,Minzhi Street,Longhua District,518131,Shenzhen,China(Mainland)