Fiberglass Grating Plastic Walkway Grating FRP Grilling
Negotiable
Min.Order:1
Molded fiberglass grating is a premium-quality mesh grating,While molded grating is a chemical ,resistant flooring choice for many industrial applications,panels are molded in one piece and feature a concave non-slip walking surface. The panels allow for efficient on-site cutting to minimize grating waste. Load bearing bars in both directions allow for use without continuous side support molded fiberglass grating weighs significantly less than metal gratings while a high resin content provides excellent corrosion resistance which requires very little maintenance. A high glass content offers greater stiffness and strength resulting in a higher safety factor.
molded fiberglass grating is composed of fiberglass rovings combined with a thermosetting resin. All of the resins contain a UV inhibitor.
Standard grating has a concave profile on the upper surface for skid resistance. Grit tops are available upon request.
Molded fiberglass stair tread covers provide an easy, costeffective way to increase the safety of stairways. The covers are intended for installation over concrete, metal or wood steps. Fiberglass stair treads may also be covered with covers stair tread covers are ideal for use in any area where frequent use or exposure to slippery environments increases the risk of accidents. maintenance-free service can be customized with various colors and stenciled safety messages.
Thickness/Height(mm) | Specification(m) | Mesh Size(mm) |
25 | 1.22*3.66 | 38*38 |
1.22*4.04 | ||
1.22*3.66 | 40*40 | |
1*4.04 | ||
1.22*4.025 | ||
30 | 1.22*3.66 | 38*38 |
1*4.04 | ||
30 | 1.22*4.04 | 40*40 |
38 | 1.22*2.44 | 38*38 |
1.22*3.66 | ||
1.22*4.04 | ||
1*4 | ||
1*4.04 | ||
1.22*3.66 | 40*40 | |
1.22*4.92 | ||
1*4.04 | ||
50 | 1.22*.3.66 | 50*50 |
1.22*4.015 | ||
1*4.04 |
Type M Clips
For attaching grating to supports.
Type J Clips
For attaching grating to supports for
moderate loads.
Type C Clips
For joining two unsupported edges if
needed.
Curb Angle
Strongwell's pultruded fiberglass Curb Angle provides a strong, firm base for bearing bars. Standard Curb Angle is produced using a gray, fire retardant vinyl ester resin system and is available in three sizes.
Solid Surface
surface with a slip resistant grit
surface
Hengshui Aoliande Foreign Trade Co., Ltd. is professional manufacturer of FRP Pipe, FRP storage tank, FRP cooling tower, FRP molded products, FRP pultruded products and relative FRP production machines & technology, we have two international sales branches-Hengshui Aoliande Trading Co., Ltd. And Hengshui Gains Trade Co., Ltd, through the continuous development and introduction of professionality and technology, our company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service, passed ISO9001, ISO14001, OHSAS18001 management system certification, now we have 300 staff, annual sales of glass fiber reinforced plastic series products achieved 20,000 tons, products have been sold to all over the world, USA, Brazil, Japan, Germany, India, Malaysia, Egypt etc, and won the support and trust from new & old customers.
Major products:
FRP vessel and chemical
equipment in sets;
FRP high, medium & low pressure pipe
FRP septic tank
FRP molded & pultrused products
Electrolytic cell S/F, F/F oli storage tank
Whole set of FRP prodcution machines
Hengshui Aoliande Trade Co.,Ltd. not only have ability to sell & supply products, but also has design ability of material, structure and products, our company can provide customers with technical advice, supply of goods and material, transportation, installation supervision etc service.
Main application:
Urban water supply and drainage
Desalination of sea water
Chemical industry
Metallurygy Brewing
Electric power
Oil storing
Sewage treatment
Building Municipal works
Highway facilities