High Pressure Square Counterflow FRP GRP Fiberglass Cooling Tower
Negotiable
Min.Order:1
1.Cooling towers are generally available in thermal power plants.After the water is heated, the steam turbine is driven by high-pressure gas, and the remaining gas needs to be cooled.
2. The central air conditioner also has the function of cooling tower to cool the circulating liquid.
3. There are also professional production of FRP cooling towers, commonly known as cooling water tower, cold water tower, cold water tower, glass tower, water tower, etc., mainly square, round, cross-flow, counter-flow, no filler spray cooling tower series.
1. Tower Body: reasonable shape, steady air flow, high-quality material, bright color, anti-aging, high strength, light weight, corrosion resistant. The down tower body can be equipped with the spilled water, sewage and automatic feed pipe according to the order request. It can absorbent water directly from here so the cooling pool is not needed. In addition, it is equipped with the
silencing mat to reduce the noise effectively.
2. Filler: adopts to the PVC wave plate, Increased lateral convex rib so it can enhance the redistribution capacity of the water, low resistance, the thermal performance is good, the adaptive temperature range is -50--70.
3. Water Distributor and water pipe: Equipped with the stainless steel ball bearing, operation flexible and reliable. uniform water distribution.
The material of water pipe is FRP and the closed water board is installed in the pipe to overcome the phenomenon of floating water.
By the way, you can also choose the spray type water distribution system.
4. Fan: low noise and high efficiency fan. The blade of fan is plate airfoil type (aluminum alloy, steel, FRP )
5. Motor: Specially designed for the cooling tower. Low noise, saving energy,waterproof properties is good, waterproof properties is good and high efficiency.
6. Reduction Gear: Adopts to the polyester fiber reinforced neoprene belt transmission, high temperature resistant, high efficiency, low noise, don't stretch in the water so it can overcome the skid phenomenon, or the gear box connect with the motor together.
7. Noise Elimination Device: Ultra low noise type cooling tower increase the sound absorption material outside the air intake, also equipped with the sound absorption grating in the tower body in order to achieve maximum noise reduction effect.
There is shielding and absorption material trumpet sound absorption grating in the upper tower body air outlet to reduce the noise of the fan and motor.
8. Wind Inlet Window: Equipped with the FRP louver blade, Air resistance is small, so it is suitable for the northern region and the place that need to the cooling tower all year around.
9. Support Frame: All the steel frame are assembly type. The surface of support frame is galvanized and paint anti-corrosion.
The fastener are all adopt hot dip galvanized steel.
1, Should be placed in a well-ventilated and clean place.
2. The horizontal flow tower inlet pipe is installed on both sides and connected to the water distribution tank. The user shall set a butterfly valve at the nozzle to adjust the flow.The inlet pipe can be introduced by the lower main pipe, or the main pipe can be placed on the tower, when the pipe support should fall on the rack on the side of the cooling tower.The outlet pipe can be connected to the water tank at the bottom of the tower in either direction of inlet air.
3. Adjust the roundness of the air duct for safety and use, and make the clearance between the blade tip and the tower wall equal, no less than 10mm.Blade angles should be aligned.The method to adjust the blade is to mark the front and rear edges of each blade at 150mm close to the blade tip, and then measure the distance between the front and rear edges of each blade by the lower chord of the support, so as to calculate the height difference between the front and rear edges of each blade. If the height difference reaches the same through several adjustments, the blade is qualified.
4. Avoid using in the field with multiple layers of ash and acidic gas, or it will lead to the corrosion of heat exchanger and piping.
5. The distance between the cooling tower's air inlet and the wall is as follows: the single tower is 2 meters, the double tower is 2.5 meters, the three tower is 3.5 meters, the four towers should be more than 5 meters, the wall avoiding height should be lower than the overall height of the cooling tower.
6. The distance between the exhaust port of the cooling tower and the obstacles shall be more than 5 meters.
Before-sale services:
(1) Tell customers how to use our products and matters needing attention.
(2) Guide customers to choose the best and economic product, recover the investment within short time.
(3) Site inspection if you need.
After-sale services:
(1) If the project needs our installation guidance, we can send our engineer and translator. We can also send customers installation video to teach them how to fix and operate with our product.
(2) Usually, our product warranty is 18 months after leaving factory or 12 months after installation. within this months, all parts broken will be responsible for our factory.
(3) Regular contact with customer, consult with the customer feedback, come true with the customer's two-way communication.
Hengshui Aoliande Trading Co., Ltd is a professional sales of FRP pipe, FRP tanks, FRP pultrusion profiles, FRP moulded products and complete sets of glass fiber reinforced plastic production equipment professional, through the professional and technical development and the introduction, the company relies on advanced technology, exquisite craft, reliable quality and perfect service, and passed the ISO9001, ISO14001, OHSAS18001 management system certification, the company existing staff more than 50 people, annual sales of glass fiber reinforced plastic series of products 6000 tons, the products have been sold to all over the world, The United States, Brazil, Japan, Germany, India, Malaysia, Egypt and other countries have won the support and trust of new and old customers.
Major products:
FRP vessel and chemical
equipment in sets;
FRP high, medium & low pressure pipe
FRP septic tank
FRP molded & pultrused products
Electrolytic cell S/F, F/F oli storage tank
Whole set of FRP prodcution machines
Hengshui Aoliande Trade Co.,Ltd. not only have ability to sell & supply products, but also has design ability of material, structure and products, our company can provide customers with technical advice, supply of goods and material, transportation,installation supervision etc service.
Main application:
Urban water supply and drainage
Desalination of sea water
Chemical industry
Metallurygy Brewing
Electric power
Oil storing
Sewage treatment
Building Municipal works
Highway facilities