1. FRP water tank possesses sheet molding compound, sealing materials, metal structure and 

piping system, etc. Designed capacity is from 0.125m³to 10000 m³.

2. FRP water tank plates adopt foodgrade resin material, formed by high temperature and high 

pressure. It is made by the press machine.

3. FRP water tank is assembled by standard water tank plates, our plates have 5 sizes for your 

choosing ,such as 1500mm*1000mm;1500mm*500mm;1000mm*1000mm;1000mm*500mm;

500mm*500mm;thickness is from 4mm to 20mm,4mm thickness plate is only for the upper 

cover of water tank.

4. Plates linked together by screws, sealed and waterstopping rubber strip is nipped in the middle 

of two plates ,then added some other parts, one any size high quality water tank can be assembled.

5.FRPwater tank has many advantages:flexible size, high strength, anticorrosion, good price, nice 

appearance,  easy to clean, etc .  This water tank has been widely used in residential buildings, 

hotels, office buildings, schools, mine industry, enterprise to store drinking water, fire-demand 

water, etc.

 

Product Size

Volumen	1.0*1.0	2.0*1.0	3.0*1.0	4.0*1.0	5.0*1.0	2.0*2.0	3.0*2.0	4.0*2.0	5.0*2.0
1.0	1.0	2.0	3.0	4.0	5.0	4.0	6.0	8.0	10.0
1.5	1.5	3.0	4.5	6.0	7.5	6.0	9.0	12.0	15.0
2.0	2.0	4.0	6.0	8.0	12.0	16.0	20.0	18.0	24.0
2.5	2.5	5.0	7.5	10.0	12.5	10.0	15.0	20.0	25.0

Accessories and specifications

1. Support for Panels: The panels shall be supported externally or internally by an adequate support system. External Reinforcement - Hot Dipped Galvanized Steel
Internal Reinforcement - Hot Dipped Galvanized or Stainless Steel 304 rod support and tie-rod
2. Sealing Materials: Non toxic Rubber foam to be used for all jointing, it is especially developed with long experience and technology on SMC products. It maintains soft itself and adhesives even at low temperatures
3. Bolts, nuts and washers for the assembly of panels: Exposed externally are hot dipped galvanized steel and in contact with water internally are hot dipped galvanized steel or stainless steel 304
4. Flange: the flanges for inlet, outlet, drainage, overflow are hot dipped galvanized steel or stainless steel 304
5. Ladders: SMC sectional tank of 1.5m depth or more shall be provided with internal ladder made up of materials same with the supports. The external ladders shall be galvanized mild steel or equivalent
6. Drainage: The dome shaped bottom panel with a concave drain panel facilitates complete and fast drainage. The concave drain panel has been designed to ensure the periodic cleaning and inspection of tank
7. Overflow Screens: it can be supplied with a screen overflow having a micro mesh filter
8. Man-hole opening & Inspection Hatches: the size can be customized; normally it is supplied with a standard size of: 600 x 600mm. the opening can be designs of bolt, seal-tight locking arrangement
9. ABS roof vent with PE insect screen
10. Float level indicator, optional SS304 for internal and external support structure are available on request

Product Applications
1). Potable Water Storage (drinking water) 
2). Rainwater Harvesting & Storage
3). Emergency Water Storage
4). Pump Chambers
5). Effluent/Acid and alkali solution treatment & Storage 
6). Hospital,buildings,building site, school and other place