Technical Specification
1. Design
1.1 Material
The panel is made of Q235 steel by hydraulic punching machine;
The size of the panel is :1220*1220mm, 1000*1000mm,1000*500mm, 500*500mm;
The thickness of the panel mainly includes: 5mm, 4.5mm, 3mm, 2.5mm, 2mm, 1.5mm. It is different according to the tank dimension.
1.2 Flanges
The sectional panels shall be pressed to double flanges at the angles of 45 degree and 90 degree to the face of the plate on four sides.
1.3 Reinforcement Method
All tanks are internally braced with angle stays to endure the rigidity of the tank when filled with the water. The Top panel is supported by top panel support, which shall be made of hot-dipped galvanized material.
2. Accessories
2.1 Bolt. nut & washers
hot-dipped galvanized material.
2.2 Sealing material
Non-toxic P.V.C foam tape shall be used in between the joints.
2.3 Covers
The tank cover shall be constructed from 1.4mm to 3.0mm of thickness hot-dipped galvanized material according to the requirement.
Galvanized Sectional Panel Bolt Connected Water Tankis consist of high quality mild carbon steel Q235 A class grade, This product manufacture, installment are not affected by the civil construction, do not need welding equipment, Using hot zinc corrosion surface treatment, attractive and durable. To prevent secondary pollution, water quality is beneficial to human body health.
Features:
1, stainless steel tanks are generally made of Q235 stainless steel sheet material, stable physical and chemical properties of water pollution, ensure clean water quality;
2, stainless steel water tanks stamping molding, high strength, light weight, looks clean, beautiful and elegant;
3, water tank panels generally use high nickel above 8.0 2352B board, smooth surface appearance, easy to clean;
4, due to the dense surface oxide layer, excellent corrosion resistance, good sealing performance;
5, a large impact resistance, strong seismic performance;
Main Products: , , ,
Facebook
X
Pinterest
Linkedln