3051Intelligent differential pressure transmitter | ky300DP |
Measuring medium | Liquid and gas are non corrosive |
Range | ‘-0.01-0-70Mpa |
Overload pressure | 150% |
Accuracy | 0.1%FS,0.2%FS,0.075%FS |
Failure pressure | 300% |
Response time | ≤10ms |
Service temperature | ‘-20~125℃ |
Waterproof grade | IP66 |
Power | 24VDC |
Output | 4-20mA/HART |
Process interface | 1/4NPT |
The KY300DP series differential pressure transmitter
uses single crystal silicon resonant sensor technology
for measuring the flow, level, density and pressure of
liquid, gas or steam.The KY300 differential pressure
transmitter is a transmitter that measures the pressure
difference at both ends of the transmitter, with a
product accuracy of 0.075%. The measured differential
pressure can be converted into a 4~20mA DC current
signal output, which can measure, display or remotely
monitor the static pressure, with the functions of rapid
response, remote setting, self-diagnosis, etc.
Product characteristics:
Remote setting and monitoring function: the
measurement range can be set remotely and
monitored through the HART communicator;
Online communication: during online communication, the
output signal and the communication signal do not interfere
with each other;
Enhanced pulse mode and event notification: the
advanced pulse mode includes various transmission
settings through the specified pulse variables, update
cycle and information trigger mode, and the event
notification function facilitates to send warning signals
to the user based on the preset status change and self-
diagnosis;
Lengmbone, up to 32 characters (HART 7): for
trombone, contains a lot of data information to facilitate
better management of equipment;
Self-diagnosis: wrong range, temperature overrun and
range can be set through HART communication;