KY3008 putting -into type liquid level gauge is widely used in well measurement and river depth measurement

Volume and industrial sewage treatment system areas.The Kyue uses the silicon pressure resistance pressure sensor as the measuring element to accurately measure the liquid static pressure proportional to the liquid level depth, and transforms it through the signal conditioning circuit into a standard (current or voltage) signal output to establish a linear correspondence between the output signal and the liquid depth to realize the measurement of the liquid depth. The product has high accuracy and small volume. Put directly into the liquid, you can measure the liquid height from the transmitter end to the liquid surface, which is convenient to use.

 pressure range: optional between 0~0.5m and 0~1000m. Pressure range: optional between 0-0.5m and 0-100m.

Maximum overpressure: 8 * FS (range ≤ 1.5m) 6*FS(1.5m

Blocking pressure: 10 * FS (range ≤ 3.5m) 6 * FS max. 1400m (range ≤ 3.5m)

Long-term stability: ± 0.2%FS/ Annual output impedance: mV output: 1.8K Ω Temperature compensation range: -20~60℃

Split cable length: ambient temperature 80℃ Maximum cable: 30m

Impact: The product can withstand the impact of 30g peak half-sine wave of 15ms in each axial direction

Composite range: Composite pressure range is also available. Please contact the manufacturer for the customers in need.

l Zero and full range output is adjustable

l With short-circuit protection and antipolarity protection

l Mege pressure, pressure and sealing reference pressure can be measured

l Simple in shape, solid and durable

l All-steel stainless steel structure;

l Standard thread-induced pressure measurement method;

l Constant-current source power supply;

l Laser resistance adjustment compensation for zero point and temperature performance;

l Select solid state pressure sensor, high reliability and stability;

l Cable or connector leads mode.

l Laser resistance adjustment compensation for zero point and temperature performance;

l Suitable for non-conductive, non-corrosive liquids;

Application industry:

It is widely used in petroleum, chemical industry, metallurgy, power plants, sewage treatment, water pools, high-speed rail cleaning equipment, water wells, lakes and storage tanks.

1. Scale: optional between 0~0.5m and 0~100m.

2. Overpressure: 1.5 times full range pressure or 150m(for minimum)

3. Pressure type: gauge pressure or pressure or seal gauge pressure type

4. Pressure connection: M20 × 1.5 External threaded with waterline seal optional

5. Corresponding material of the measuring media:

316SS Harbin alloy polyurethane cable with input connector compatible liquid

6. Temperature influence:

± 0.5%FS TEB (range ≥ 3.5m)

± 0.8%FS TEB (range <3.5m)

7. Zero-point and full-range setting:              mV output: ± 1.5mV; ± 3mV(max)

When mA output: ± 0.1.0mA max value 8. Accuracy: ± 0.2%FS

9. Operating temperature: -20℃ ~60℃

10. Power supply: 12V~26V DC

11. Output signal: 4mA~20mA HART(two-line), 0 / 10V~ 5V DC(three-line)

12. Protection class: IP68 waterproof to 150m

13. Electrical connections: 1830 General Cable (30m) or 1840 general cable