Encoder Sensor for AC Asynchronous Motor of EV and Golf Cart Forklift Parts
Negotiable
Min.Order:1
Disc Encoder Sensor for AC Asynchronous Motor of EV and Golf Cart Forklift Parts
Disc Encoder Sensor for AC Asynchronous Motor of EV and Golf Cart Forklift Parts
Encoder Sensor for AC Asynchronous Motor of EV and Golf Cart Forklift Parts Three Bracket Type
Encoder Sensor for AC Asynchronous Motor of EV and Golf Cart Forklift Parts Aluminum Ring Series
Encoder Sensor for AC Asynchronous Motor of EV and Golf Cart Forklift Parts Three Brackets Type
Encoder Sensor for AC Asynchronous Motor of EV and Golf Cart Forklift Parts Four Bracket Type
Item | Parameter | ||||||
Lateral line | Top line | ||||||
Size | 35mm/45mm/39.5mm/50.3mm | ||||||
Supply voltage | 4.5V~18V | ||||||
Duty cycle | 90°±20° | ||||||
Phase shift | ≤15° | ||||||
Phase Difference | 120Ω±20% | ||||||
load current | Maximum 20 A | ||||||
Hz | 10Hz-20KHz | ||||||
Operating/storage temperature | .-40°-150° | ||||||
Signal type | Square wave | ||||||
Output high level | ≥VS-0.5V | ||||||
Output low level | ≤0.5V | ||||||
Rise time | 10μs (typical) | ||||||
Fall time | 2μs (typical) | ||||||
Air gap | 0.0-1.8mm | ||||||
Target tooth width | 2.0mm (Other sizes are optional) | ||||||
Target slot width | 2.0mm (Other sizes are optional) | ||||||
Tooth height | >3.0mm (recommended) | ||||||
Tooth thickness | >10.0mm (recommended) | ||||||
Sensor offset position | ±1.5mm |