Encoder Sensor for AC Asynchronous Motor of EV Golf Cart Forklift Parts
Negotiable
Min.Order:1
Item | Parameter | ||||||
Lateral line | Top line | ||||||
Size | 35mm/45mm/39.5mm/50.3mm | ||||||
Supply voltage | 4.5V~18V | ||||||
Duty cycle | 90°±20° | ||||||
Phase shift | ≤15° | ||||||
Phase Difference | 120Ω±20% | ||||||
load current | Maximum 20 A | ||||||
Hz | 10Hz-20KHz | ||||||
Operating/storage temperature | .-40°-150° | ||||||
Signal type | Square wave | ||||||
Output high level | ≥VS-0.5V | ||||||
Output low level | ≤0.5V | ||||||
Rise time | 10μs (typical) | ||||||
Fall time | 2μs (typical) | ||||||
Air gap | 0.0-1.8mm | ||||||
Target tooth width | 2.0mm (Other sizes are optional) | ||||||
Target slot width | 2.0mm (Other sizes are optional) | ||||||
Tooth height | >3.0mm (recommended) | ||||||
Tooth thickness | >10.0mm (recommended) | ||||||
Sensor offset position | ±1.5mm |