Liyi ASTM D1790 Low Temperature Impact Testing Machine, Charpy Impact Tester
Negotiable
Min.Order:1
Liyi Price Of Gold Density Testing Machine Precious Metal Purity Gold Karat Tester
Liyi Plastic Pipe Hydrostatic Test Equipment Hydrostatic Pressure Tester
Liyi Plastic Melt Flow Index Manufacturer MFI Testing Machine Plastometer Tester
Liyi IEC60695 Glow Wire Ignition Test Machine Glowing Filament Glow Wire Tester
Liyi ASTM D1790 Low Temperature Impact Testing Machine, Charpy Impact Tester
This impact tester is an instrument for testing the impact resistance of metal materials under dynamic loads. It can continuously conduct a large number of metal impact tests. It adopts full automatic control. The control system uses programmable logic controller (PLC) to control the whole process of swing taking and impact test through computer software program. Show the impact absorbing power, the rotation angle of the pendulum and print the test report. By equipping cryogenic tank, the test can be carried out at room temperature to - 60 degrees. It is an indispensable test instrument for metallurgical, mechanical manufacturing and other units, as well as for the research of new materials in scientific research units.
Related standards:
ASTM E23, ISO148-2006 and GB/T3038-2002, GB/229-2007, ASTM E23-07a, GB/T 18658-2002, JJG 145-2007
Features:
1. The machine is controlled by PLC. The swing, pendulum, feeding, positioning, impact and temperature adjustment settings are all electric and mechanical control. Equipped with special feeding device, automatic feeding, sample automatic end positioning. The time from discharge to impact is not more than 2 seconds, which meets the requirements of Charpy impact test at low temperature. After impacting the sample, the residual energy can be used to swing automatically, and the preparation for the next test is made, so the work efficiency is high.
2. The main engine adopts double supporting pillars, the main shaft is simply supported by beam type support and pendulum, the radial load distribution of the bearing is reasonable, the deformation of the main shaft is effectively reduced, and the energy loss caused by bearing friction is greatly reduced.
3. Using double-stage standard deceleration motor to lift hammer, running smoothly.
4. Hydraulic cushion is used for pendulum hanging device, and pendulum hanging is stable.
5. The precise design of the pendulum three-dimensional software ensures the accuracy of the strike center and the pendulum moment.
6. The impact cutter is fixed by screw, which is easy to replace.
7. The main engine is equipped with safety pins and safety net to ensure the safety of the test.
Model |
LY-450DZ |
impact energy |
450J |
Pre-rising angle of the pendulum |
150° |
The distance between the pendulum shaft and impact point |
750mm |
Angle accuracy |
0.1° |
Impact speed |
5.2m/s |
Specimen bearer span |
40mm |
Sample frame bottom circle radius |
2.5mm |
Dip angle of supporting surface of supports |
11° |
Impact blame angle |
30° |
Thickness of impact knife |
16mm |
Standard specimen dimension |
10mm×10(7.5/5)mm×55mm |
Impact blame radius |
2-2.5mm |
Moment of pendulum(N.m) |
450J 241.1543N.m |
Cooling way |
Compressor |
Capacity of sample box |
20 |
Range of low temperature |
RT~ -60°c |
Cooling speed |
RT~0℃ around 1.2℃/min 0℃~-20℃ around 1.0℃/min -20℃~-60℃ around 0.5℃/min |
Precision of controlling temperature |
Fluctuation ±0.5°C grades 1°C |
Speed of sending specimen |
≤2S |
Power supply |
3phs, 380V, 50Hz |
Dimensions (mm) |
2200×1500×1900 |
Net Weight (kg) |
850 |
Standard accessories:
1. 450 Joule mainframe;
2. 450J pendulum;
3. One motor (mounted on the main engine);
4. A set of swing drive device (mounted on the main engine);
5. A set of automatic pendulum device (mounted on the main engine);
6. A set of refrigeration temperature control device;
7. A set of automatic feeding device (mounted on the main engine);
8. A set of safety net; (totally closed);
9. One pedestal adjuster;
10. Sample alignment is one.
11. One photoelectric sensor;
12. A set of special measurement and control software;
13. Control System Set (Siemens PLC);
14. Lenovo Microcomputer Set;
15. A Color Inkjet Printer;
16. Four anchor bolts;
17. Adjust four slant bars;
18. Pressure pump set;
19. A set of low temperature systems (minimum temperature - 60 C).
Software:
Dongguan Liyi Environmental Technology Co., Ltd is a high technology supported production-oriented enterprise who specializes in developing, manufacturing, marketing all kinds of environmental equipment. Our company has advanced technology, experienced technical management personnel and efficient professional service staffs, fine quality management and perfect after-sales service system.
Our company mainly produce simulated environmental tester, plastic and rubber tester etc. on all kinds of materials testing industries. The production base is located in the country’s manufacturing center Dongguan, Guangdong province, China. In order to service our customers better in terms of reducing costs and early delivery, in 2005 we had set up an office in Kunshan, Jiangsu province for Eastern China marketing and servicing.
Liyi deals with customers from more than 150 countries and regions. Meanwhile, we are committed to cooperate with different dealers in different countries and regions in order to offer better service. Our mission is to help every customers establish testing labs to ensure the quality of their products.
Our company will continue to develop, innovate and keep faith. We combine with the international testing standards and the specific demands of customers that may establish a new banner in Chinese testing industry.
During the whole business process, we offer Consultative Selling service.
1)Customer inquiry process:
Discussing testing requirements and technic details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2)Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photoes to show the proucts appearance. Then, confirm the final solution and confirm final price with customer.
3)Order process:
We offer below business term:
Accepted Delivery Terms |
FOB, CFR, CIF, EXW, DDP |
Accepted Payment Currency |
USD, EUR, HKD, CNY |
Accepted Payment Type |
T/T, L/C, Credit Card, PayPal, Western Union, Cash, Escrow |
Nearest Port |
Shenzhen, Guangzhou, Shanghai, Qingdao, Tianjing or rquired |
4)Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
5)Installation and after sale service:
Defines installing those products in the field and providing after-sales support.