"Rotating drum drying mahcine "
ZHENGKE
Zhengke Service:Honesty first,quality foremost.
Zhengke Spirit:Honesty,delicate,high efficient and practical.
Managment Principle:The development way depends on the wealth comes out of good faith.
Management belief:Establish of Zhengke brand for satisfaction of users.
Delivery Method: By sea or other ways.
Packing Method:Nude packing,or according to the client's requirements.
Product Description:
The main body of metallurgy dryer is a cylinder at a certain gradient with horizon. The cylinder is drove by gear at a speed of 2-6r/min. The general gradient of cylinder is about 1°-5°. Materials enter cylinder by the upper end. As the cylinder rotates, materials flow to the lower end under gravity and get discharged. During this period, materials get thorough contact with hot air, moisture inside gets vaporized. Due to metallurgy dryer system operates under negative pressure, the inlet and outlet both adopt sealing device to avoid air leakage.
Wheat drying machine application & composition:
The wheat drying machine is mainly composed by the revolving body, lifting plate, driving device, supporting device, sealing ring and other components. So it has the advantages of reasonable structure, perfect in workmanship, high yield, low energy consumption, convenient to operate.
The working principle of the wheat drying machine:
Dry wet materials by belt conveyor or bucket elevator to the hopper, and then through the hopper feeder through the feeding tube into the feed end.The feed pipe slope should be greater than the natural inclination of materials, so that the material flow into the dryer smoothly.Dryer cylinder is a horizontal line slightly tilted into the rotation of the cylinder.Material from high end to join, heating medium from low-end to enter, and material into a counter-current contact, there is also a heating medium with materials and flow into the cylinder.With the rotation of the cylinder material by gravity to run to the bottom on the lower side.Wet materials in the process of cylinder body move forward, directly or indirectly get the heating medium for heat, to dry the wet material, and then by the belt conveyor or screw conveyor at the discharge end.Inside the cylinder wall with copy board, its role is to put the material copy up and again, the contact surface is increased and the air flow of material, in order to improve the drying rate and promote the material progress.Heating medium is generally divided into the hot air and flue gas, etc.After heating medium by the dryer, generally need to cyclone with materials in the gas trap.For further reducing exhaust dust content, but also put again after a bag filter or wet precipitator emissions.
Rotating drying machine has the following features:
1 Energy efficient operation
2 Self adjusting to demand
3 Maintenance friendly
4 Low noise deive gear
5 Low consumption
6 High Capacity
7 Exhaust direct connectable to wetfilter
Through the relevant the certification:
Cooperation:
Excellent sales service:
- technology support and suggestion
- site testing and civil engineering instruction
- products acceptance, installation and debugging
- free accessory
- free repairment and replacement during warranty period
If you have any question,please contact me,better service for you !
place order or send inquiry we would like to know the following information:
-What kind of material you are going to dry?
-Capacity per hour you need?
-Moisture before and after dry you required?
-Fuel available for the dryer?
For more information please contact us without hesitate !! Zhengke, your reliable supplier!