Product description of green coal briquetting machine

Green coal briquetting machine can be used to press coal fines, coke fines, charcoal powder, carbon black, iron ore fines, phophorus gypsum powder and other materials into briquettes.It has the features of energy-saving and environmental protection and easy transportation, improved utilization of waste with good economic and social benefit.This machine is widely used in coal industry and metallurgy.

Main Features of green coal briquetting machine:

1) High ratio of compression and high briquette output;
2) The roller is made by hard materials with good wear resistance and long life time;
3) Low maintenance expenses;
4) It can make various shapes of briquette ball, such as egg shape, pillow, round and square shape etc.
5) The machine is easy to operate and maintain; The molding materials are energy saving, easy to transport; With ISO, CE certificated, the quality can be guaranteed.

Machine Parts

Name: Reduction gears

Original: China(mainland)

It is used to slow down the rotate speed. The rotate speed which provided by motor is very fast. After through the reduction gears, the rotate speed can suitable for briquetting machine.
We adopt national standard, the quality is guaranteed.

Machine Parts

Name: Nylon rod
Original: China (mainland)

It used in the connect which between machine body and reduction gears. When the too hard material enter into briquetting machine and can't be press, the big pressure will break off the nylon rod, thus to protect the briquetting machine.
One briquetting machine need a dozen nylon rods.

Final shapes of green coal briquetting machine:

The finished products usually 20-60mm, green coal briquetting machine can be designed of round ball shape, oval shape, oblateness, elongated shape, square shape, pillow shape etc. What is more, the molds can be customized according to customer's special demands.

Product line of green coal briquetting machine:

1) The raw material which has high content water will be dried by the rotary dryer.
2) If there were several mixed kinds of materials, the materials after been dried will be reasonable distributed by the electrical dosing machine.
3) And they will be conveyed to the crusher to be crushed into fines via belt conveyor.
4) The crushed fines will be mixed by the double shaft mixer with some binder.
5) These mixed materials will be conveyed to increasing density machine through belt conveyor.
6) After that, the materials will be transmitted to briquetting machine to make briquettes.
7) Final briquettes will be conveyed to vertical dryer or chain type dryer or belt dryer to be dried.
8) After been dried, these briquettes will be delivered to storage area or directly loaded.
9) The whole production line could be designed according to customer demand.