New condition widely used drum rotary drying equipment

 

 

Product Introduction

 

New condition sand drum rotary drying equipment is mainly composed by the revolving body, lifting plate, driving device, supporting device, sealing ring and other components. So it has the advantages of reasonable structure, perfect in workmanship, high yield, low energy consumption, convenient to operate. Rotary dryer can dry many kinds of materials which contain moisture, such as coal, coal slurry, slag, industrial waste, and clay stone. Rotary dryer are widely used in building materials,metallurgy, and chemical industry. Rotary dryer is handling by bringing it into direct contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube,the dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under.

 

 

 

Working Principle

 

Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.

 

 

 

 

Details Structure

 

 

 

Advantages

Technical parameter

 

 

Company Information

 

ZhengzhouChina machinery manufacturing capital in 1982, is a large jointstock company specialized

 in manufacturing heavy mining machinery and civilian machinery; it has six production bases with an

 

Our Services

1, We will provide you the prophase plan,process flow design and manufacturer equipment according to your special requests.

2,Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.

3,We will regularly pay return visit to customers to establish long term friendship. Supplying technique, building design, instruction, installation and debugging for free.

4,We provide one-year warranty to make sure your machine runs consistently. We always offering lifelong services and provide spare parts for a long term,and repair main parts under right using for free in two years.

 

FAQ

 

1,What guarantee do you provide?

Our products are manufactured strictly according to national and international standard, and we take a test on every machine before delivery. If products’ quality is not consistent with the description as we described or the promise before you place order, we promise 100% refund.

2,How about the price?

We are the direct manfacturer,so we can offer you the lowest price than market price, and we have a policy that “ for saving time and absolutely honest business attitude,we quote as low as possible for any customer, and discount can be given according to quantity”.