ISO certificate High-efficiency ZZXM-4 briquette machine

ISO certificate High-efficiency ZZXM-4 briquette machine

ZZXM-4 briquette machine introduction:

ZZXM-4 briquette machine is mainly used for high-density metal scrap (scrap iron, copper scrap, aluminum scrap, etc.), granular powder metal powder (iron powder, aluminum powder, copper powder, lead powder, etc.) , metallurgical additives, sponge iron, etc., without adding any binder pressed into the case of cylindrical cakes of high-density block (weight 2-8 kg), the cake density of up to 5T/M3 block above (the different raw materials, press out the cake block density and not quantity is not the same), pressed into the cake pieces can be directly cast furnace use.

1) Raw material size should be smaller than 3mm.

2) The best moisture for briquetting is 10-15%.

ZZXM-4 briquette machine features:

The ZZXM-4 briquette machine can press all kinds of mineral powder, metal powder, coal powder, coke powder and other materials to make them molded. Because of the mandatory squeeze rollers, so the products have the three high characteristics: high density, high strength, high hardness, Because of the mandatory squeeze rollers, so the products have high density, high strength, high hardness, and the local roll is used in 65Mn hard materials with good wear resistance. Effectively improve the life of a roll.

Application of ZZXM-4 briquette machine:

The ZZXM-4 briquette machine have been mainly used in home fire, heating with anthracite honeycomb made of cylindrical briquettes. Previously been processed into the coal sphere slightly larger than ping-pong, and later the coal processed into one cylinder, and marked with a number of holes inside the cylinder, because it can increase the surface area of coal, so that the full combustion of coal, to reduce resource waste.

Working principle of ZZXM-4 briquette machine:

This series of ZZXM-4 briquette machine will make the powder pass the power on to the two pressure roller through the reducer. The two sides and roll rotation, in both the rotating roll, Natural materials to enter the ball roll mode, with the roll rotation, material pressure on a small become larger, When the material to the two rollers rotating line contact point, the pressure of materials has reached the peak. Tremendous pressure in the role of line, the materials become a finished product from the powder ball.

Production process of ZZXM-4 briquette machine:

Crushing(if material not in powder)→Mixing→ add biding material →ZZXM-4 briquette machine→ Drying→ Packing & Sales.

Final briquettes size will be 30-60mm or custom-made.

The technical parameters of ZZXM-4 briquette machine

Zhongzhou design the ZZXM-4 briquette machine specifically for your application , so if the size of briquetting machine is not listed , please contact our international sale department for more information.