SH Series Heavy Duty Slurry Pumps
Negotiable /Set
Min.Order:1 Set
Shijiazhuang Minerals Equipment Co. Ltd.
Horizontal Slurry Pumps; Metal Lined Slurry Pumps; Heavy Duty Slurry Pumps;
Model: SH/100D, SH/150E, SH/200F
Series: Metal Lined Slurry Pumps
General Introduction:
▶Our horizontal slurry pumps are designed for heavy-duty applications such as mining, minerals processing, mill discharge, power plants, tailings, and other industrial applications, for maximum abrasion, erosion, and corrosion resistance.
▶The pumps are in a wide range of sizes, available with both high chrome and rubber wearing parts. Components like impeller and volute come in a range of hard metal types and elastomers to suit the specific application.
▶Different shaft seal types are available to suit every requirement, including gland packing seal, expeller seal, and mechanical seal.
▶Our metal-lined slurry pumps are designed for heavy-duty industrial applications, to handle the most arduous slurries.
▶Wear resistant cast alloys are used for slurry pump liners and impellers where conditions are not suited to rubber, such as with coarse or sharp-edged particles, or on duties having high impeller peripheral velocities or high operating temperatures.
Specifications:
Pump | S×D | Allowable | Material | Clear Water Performance | Impeller | ||||||
Capacity Q | Head | Speed | Max.Eff. | NPSH | No. of | Vane Dia. | |||||
Impeller | m3/h | l/s | |||||||||
SH/25B | 1.5×1 | 15 | Metal | 12.6-28.8 | 3.5-8 | 6-68 | 1200-3800 | 40 | 2-4 | 5 | 152 |
SH/40B | 2×1.5 | 15 | 32.4-72 | 9-20 | 6-58 | 1200-3200 | 45 | 3.5-8 | 184 | ||
SH/50C | 3×2 | 30 | 39.6-86.4 | 11-24 | 12-64 | 1300-2700 | 55 | 4-6 | 214 | ||
SH/75C | 4×3 | 30 | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4-6 | 245 | ||
SH/75D | 4×3 | 60 | 245 | ||||||||
SH/100D | 6×4 | 60 | 162-360 | 45-100 | 12-56 | 800-1550 | 65 | 5-8 | 365 | ||
SH/100E | 6×4 | 120 | 365 | ||||||||
SH/150E | 8×6 | 120 | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 510 | ||
SH/150F | 8×6 | 260 | 510 | ||||||||
SH/150R | 8×6 | 300 | 510 | ||||||||
SH/200F | 10×8 | 260 | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 686 | ||
SH/200ST | 10×8 | 560 | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 686 | ||
SH/250F | 12×10 | 260 | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 762 | ||
SH/250ST | 12×10 | 560 | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 762 | ||
SH/300ST | 14×12 | 560 | 1260-2772 | 350-770 | 13-63 | 300-600 | 77 | 3-10 | 965 | ||
SH/350TU | 16×14 | 1200 | 1368-3060 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 1067 |
Applications:
Heavy-duty slurry pumping applications, Mining and minerals processing, Mine refuse and tailings, Mill discharge, Cyclone feed, Sand and aggregates
Materials:
Description of Parts | Material | Material Code |
Pump Body, Split-Casing | Grey Iron | G20/G21 |
Ductile Iron | D20/D21 | |
Impeller, Volute, | 27% High Chrome | A05 |
15/3 Chrome/Moly Iron | A07 | |
Corrosion-resistant 35% Chrome | A33 | |
28% High Chrome, Low Carbon | A49 | |
Shaft | 304 Stainless Steel | C21 |
316 Stainless Steel | C23 | |
Shaft Sleeve | 304 Stainless Steel | C21 |
316 Stainless Steel | C23 | |
Aluminum Oxide Coating, White | J04 | |
Chrome Oxide Coating, Black | J05 |
Driven Type:
DC(z): The pump and the engine are directly connected by a coupling.
Belt-driven Types: The pump and the engine is connected by pulleys and belts --- CV, CR(z), ZV(z).