Heavy Duty Slurry Pumps, buy 6 on China Suppliers Mobile

Product Details

Certificate: CE/ISO

Place of Origin: Hebei, China

General Introduction:

▶Designed for the continuous pumping of highly abrasive and/or corrosive slurries. These CNSME pumps feature a wide choice of replaceable hard metal or pressure molded elastomer liners and impellers and are all interchangeable within the same casing. The centrifugal shaft seal is commonly used, but an interchangeable packed gland seal is also available for every pump. Special mechanical seals for slurry service are being developed.

▶This pump is perfect for difficult mill duties. It has a long wear life and is extremely cost-efficient. The use of effective liners makes this pump easy to maintain.

▶This is a heavy-duty slurry pump that is extremely durable and easy to maintain. It is highly efficient and corrosion and erosion resistant

▶Applications like fine tailings, coal, heavy slurry, Ni-acid slurry, Phosphoric acid, process chemical, pulp and paper.

▶The 6”× 4” AH Rubber Lined Slurry Pump is a 6/4AH rubber pump, with a centrifugal expeller seal. And the Ease of maintenance features include:

• Through bolt design

• Minimum number of casing bolts

• Slip fit replaceable Shaft sleeve

• Cartridge type Bearing Assembly

• Cast in Impeller thread

• Replaceable liners are positively attached

• Impeller Release Collar on large models

▶Another important subject about the shaft sealing is the Lubrication: In centrifugally sealed pumps, lubricate the static seal chamber sparingly but regularly, by means of the grease cup.

The grease for the centrifugally sealed pump static seal chamber should have the

following specifications:

A lithium complex soap thickener grease with EP additives and oxidation inhibitors.

N.L.G.I. Consistency No 2; Drop Point 260 °C; Work penetration 25°C A.S.T.M. 265 – 295; RECOMMENDED GREASE: MOBIL HP or equivalent.

Specifications:

Pump Range	1-inch to 12-inch
Capacity	up to 2520m3/h
Total Discharge Head	up to 52m
Temperature	1-100°C

Pump Model	S×D (inch)	Allowable Max. Power (kw)	Material	Clear Water Performance						Impeller
			Material	Capacity Q		Head H(m)	Speed n(r/min)	Max.Eff. η%	NPSH (m)	No. of Vanes	Vane Dia. (mm)
			Impeller	m3/h	l/s	Head H(m)	Speed n(r/min)	Max.Eff. η%	NPSH (m)	No. of Vanes	Vane Dia. (mm)
SHR/25B	1.5×1	15	Rubber (R55)	10.8-25.2	3-7	7-52	1400-3400	35		3	152
SHR/40B	2×1.5	15		25.2-54	7-15	5.5-41	1000-2600	50	2.5-5	5	178
SHR/50C	3×2	30		36-75.6	10-21	13-39	1300-2100		2-4		213
SHR/75C	4×3	30		79.2-180	22-50	5-34.5	800-1800	59	3-5		245
SHR/75D	4×3	60		79.2-180	22-50	5-34.5	800-1800	59	3-5		245
SHR/100D	6×4	60		144-324	40-90	12-45	800-1350	65	3-5		365
SHR/100E	6×4	120		144-324	40-90	12-45	800-1350	65	3-5		365
SHR/150E	8×6	120		324-720	90-200	7-49	400-1000	65	5-10		510
SHR/150F	8×6	260									510
SHR/150R	8×6	300									510
SHR/200F	10×8	260		540-1188	200-450	7-45	300-650	80	2.5-7.5		686
SHR/200ST	10×8	560		540-1188	200-450	7-45	300-650	80	2.5-7.5		686
SHR/250F	12×10	260		720-1620	320-700	13-14	300-500	79	3-8		762
SHR/250ST	12×10	560		720-1620	320-700	13-14	300-500	79	3-8		762
SHR/300F	14×12	260		1152-2520	380-850	11-63	250-550	79	4-10		965
SHR/300ST	14×12	560		1152-2520	380-850	11-63	250-550	79	4-10		965

Materials:

Description of Parts	Material	Material Code
Pump Body, Split-Casing	Grey Iron	G20/G21
Pump Body, Split-Casing	Ductile Iron	D20/D21
Impeller, Inner Liners	Natural Rubber	R55
	Premium Black Natural Rubber	R33
	Black Soft Rubber	R26
	Black Natural Rubber	R08
Shaft	304 Stainless Steel	C21
Shaft	316 Stainless Steel	C23
Shaft Sleeve	304 Stainless Steel	C21
	316 Stainless Steel	C23
	Aluminum Oxide Coating, White	J04
	Chrome Oxide Coating, Black	J05

Driven Type:

DC(z): The pump and the engine are directly connected by a coupling.

Belt-driven Types: The pump and the engine is connected by pulleys and belts — CV, CR(z), ZV(z).