1.Characteristics:

1.Driving by synchronous belt,ensure smooth and accurate running.

2.Inverter driving,stable and power saving.

3.Use electric adjust,easy operate.

4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.

5.Automatic counting and kicking,quantity can preset.

6.Conveyer pressure adjustable according to the box to ensure best quality.

 

2. Main technical parameter:

Model	ZH-M1050-S
Suitable material	Card board 210-850gsm,N/E/F/B flute corrugated board
Max method	Automatic continuous feeding
Max mechanical speed	350m/min
Overall dimension	15000*1900*1650mm
Weight	8.5T
Power consumption	14KW,380V,50HZ

 

3.Machine configuration

Main motor	GPG Taiwan
PLC	Siemens
Inverter	Siemens
Touch screen	Siemens
Timing belt and pulley	Optibelt german
Bearing	NSK
Main axis	Taiwan chrome plated steel bar
Wall thickness	20mm tempered
Plain belt	NITTA Japan
Low voltage apparatus	Schneider
Fasten bolts	Level 12.9 Taiwan
Air cylinder	AIR TAC Taiwan
Button	Schneider

 

4.Standard & Optional configuration list

	Configuration	Units	Standard	Optional
1	Feeder section		√
2	Paper Alignment Section		√
3	Pre-fold Section			√
4	Crash lock bottom section			√
5	Upper paste barrel equipment			√
6	Down pasting equipment		√
7	Gluing system			√
8	Grinder device			√
9	Plasma treatment system			√
10	Folding and closing section		√
11	Trombone section		√
12	Air compressor			√
13	4-6 corner			√

ZH-M1050-S is the innovative multi- functional folder gluer machine designed by our companyindependently. The machine breaks the traditional concept of single-deck folder gluermachine It's double-deck that saves the space. We design the conveyor under the mainmachine. The length is 1.5 meters, which makes the boxes stick more firm. It'sconvenient for the next process. It combines a variety of folder gluer characteristics. Ithanges many disadvantages of crash lock bottom folder gluer machines, such ascomplicated structure, difficult operating and high cost. Machine plate uses laser cuttingpunching and flanging; the equipment structure is more reasonable; the assembly ismore accurate; the operation is more stable Power transmission uses synchronous belt high speed and low noise; more safety. The maximum speed is 350m/min.

 

5. Feature:

Straight line box
	A	MAX	1100
		MIN	180
	B	MAX	1100
		MIN	70
	C	MAX	400
		MIN	15

1.Feeder Section

  

·Friction feeder. Independently driven by inverter.

·  Adjustable electronic pile vibrator.

·Lateral feed gates fully adjustable to the width of the blank.

·Extendable rear pile support for long boxes.

 

2.Paper Alignment System:

  

·  Independent section that registers the blank to one side ensuring a perfect parallelism before entering the pre-folding or gluing sections.

·  Independently driven by motor.

·  Possibility to register on any side of the machine.

·  Fast and easy setup.Configuration reducer, different boxes when the conversion, the reducer with electric regulation

 

 

3.Down Gluing section

 

·Two lower (left and right) gluing tanks.

·Easy to remove and clean.

 

4.Folding Section

 

·  Independently driven by motor.

·  Smooth and accurate folding of 2nd and 4th creases.

·  Outer folding belts adjustable up to 180º with variable speed controlled by inverter

·  Easy accessibility.

·  Configure the CVT to adjust the belt speed,Make the box more neat

 

5.Trombone  Section

  

·  Independently driven by motor.

·  Smooth and accurate folding of 2nd and 4th creases.

·  Outer folding belts adjustable up to 180º with variable speed controlled by inverter

·  Easy accessibility.

·  Configure the CVT to adjust the belt speed,Make the box more neat

6.Press Section

 

· Independently motorized pneumatic press section.

·Upper section moves back and forward through a motorized system, allowing different box length.

·Pneumatic pressure regulation.

 

 

Exhibition in guangzhou and beijing