1.Characteristics:

1.Driving by synchronous belt,ensure smooth and accurate running.

2.Inverter driving,stable and power saving.

3.Use electric adjust,easy operate.

4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.

5.Automatic counting and kicking,quantity can preset.

6.Conveyer pressure adjustable according to the box to ensure best quality.

 

2. Main technical parameter:

Model	ZH-A1050 4/6 corner
Suitable material	Card board 210gsm-850gsm,N/E/F/B flute corrugated board
Max method	Automatic continuous feeding
Max mechanical speed	300m/min
Overall dimension	15800*1900*1700mm
Weight	10T
Power consumption	18KW,380V,50HZ

 

3.Standard & Optional configuration list

	Configuration	Units	Standard	Optional
1	Feeder section		√
2	Paper Alignment Section		√
3	Pre-fold Section		√
4	Crash lock bottom section		√
5	Down pasting equipment		√
6	gluing system		√
7	Grinder device			√
8	Plasma treatment system			√
9	Folding and closing section		√
10	Trombone section		√
11	4-6 corner		√

 

4.Machine configuration

Main motor	TECO Taiwan
Touch screen	Siemens
PLC	Siemens
Inverter	Siemens
Ribbed belt	WUTONG
Drive Bearing	NSK
Wall thickness	20mm tempered
Feeding belt	NITTA
Plain belt	NITTA Japan
Circuit Breaker	Schneider
Rely	Schneider
Button	Schneider
Switch power supply	Schneider
Photo Switch	Panasonic

                                

 

ZH-A1050 4/6 corner
		Straight line box	Double sides box	Crash-lock bottom box	4-corner box	6-corner box
A	MAX	1100	1050	1000	950	950
	MIN	180	200	180	180	300
B	MAX	1100	900	1100	800	800
	MIN	70	120	70	80	80
C	MAX	400	200	250	150	150
	MIN	15	20	30	25	25

 

5.Features:

1.Feeder Section

 

With independent transmission,low noise,with front adjustable wheels,max working capacity can be achieved.

Feeding knives and left and right registers fixing bar are controlled up and down by pneumatic system easily.

Feeding knifes are equipped with pneumatic mechanism for smoother feeding.

Configure the display, real-time monitoring of the paper is normal

 

2.Paper Alignment System:

 

Automatic alignment system to correct the paper feeding,avoiding the paper going to sides.

Configure the transmission  to adjust the belt speed,Make the box more neat

3.Pre-fold Section:

The pre-fold section has the advantage to make the box more plain and easy to open,even in some case the scoring is not very well.

• Left hand glue flap pre-folder up to 180º.

• 3rd crease pre-folding set up to 135º.

• 1st and 3rd crease openers.

 

4.Bottom Lock Section

Lock-bottom assembly mechanism with high elastic hookers is of deal design,fast and easy operation.

 

5.4&6-corner device (Back fold)

 

Motorized and untimed electronic back folding system with intelligent servo motor technology.

Servo-motor of back folding device

Two driven shafts allow a precise fold of the rear flaps. Easy to setup through the main touchscreen.

 

 

6.Folding Section

 

Equipped with speed variator for belts,ensure the folded boxes parallel and in good order

Fast,convenient adjustment and operation can fold boxes perfectly

The middle up and down transmission module can fold boxes synchronously or alternately

Configure the embossing wheel to adjust the belt speed so that the cartons are folded and aligned

 

7.Trombone  Section(option)

 

• Continuous and automatic box collection mechanism that ensures a neat transfer to the

Press section,    guaranteeing a wellaligned flow.

Configure the Siemens touch screen computer speed can be adjusted

 

Exhibition in guangzhou and beijing