Sintered Filter Element, buy Titanium ozone aeration disk aeration head for sewage treatment of titanium alloy aerator directly supplied by factory on China Suppliers Mobile

Product Details

Product name	Titanium alloy aerator /Ozone Diffuser
Material	Sintered with 99% purity industrial titanium powder
Product Advantages	Durable, can be used for a long time； When it is clogged with dirt or producing bubbles with low quantity, you can wash it for re-used；
Interface	Four-point interface (interface diameter: 2CM)/six-point interface (interface diameter: 2.5CM)/customized
Classification	Mushroom head aerator, aeration tube, aeration plate

Size (diameter)	Interface (customizable)	Filtration	Material
100mm	Four points /Six points	0.22μm-100μm	99.68% Purity titanium
150mm	Four points /Six points	0.22μm-100μm	99.68% Purity titanium
180mm	Four points /Six points	0.22μm-100μm	99.68% Purity titanium

Product Description

The microporous pure titanium aeration head uses industrial titanium powder (purity ≥99.6899%) as the main raw material and is sintered at high temperature and high vacuum.

Its structure is uniform, the micropore diameter is 0.22-100um, the porosity is 25-50%, the filtration resistance is small, the separation and purification efficiency is high, the mechanical properties are good, the thickness is 3 mm, the aeration bubble is 0.1-2 mm, and the aeration resistance is small The gas-liquid interface area is large, the bubbles are diffused evenly, no holes are blocked, and the corrosion resistance is strong.

The energy consumption is 40% lower than that of the conventional aerator, and the sewage treatment capacity is doubled. The service life is up to ten years. It is especially suitable for the expansion of urban sewage and large-scale water plants and the reconstruction of old aeration tanks.

Product Advantage

1. Uniform pore size, high porosity, stable pore shape;
2. Bubbles diffuse uniformly, the diameter of aeration bubbles is small, and the area of gas-liquid boundary is large;
3, high temperature resistance, can be used normally below 280℃;
4, the filtration resistance is small, the separation and purification efficiency is high, and the mechanical performance is good;
5. No clogging of holes, good chemical stability, acid and alkali corrosion resistance;
6.It has anti-oxidation performance and reduces energy consumption by 40% compared with conventional aerators;
7, non-magnetic, non-toxic, no shedding, no pollution, good biological compatibility
8. Strong anti-microbial ability, does not interact with microorganisms;
9. Good airtightness, compact structure, not easy to damage, suitable for harsh working conditions;
10. It can be regenerated online, is easy to clean, and has a long service life.

Application

The scope of application includes urban sewage, chemical industry, petrochemical industry, biological engineering, pharmaceutical industry, food industry, new expansion of large-scale water plants, and old aeration tank transformation.

Cleaning method

1. Because the surface is mostly non-water-soluble salts and oxides, it is generally soaked in 5% nitric acid, and the cleaning effect can be achieved without ultrasonic cleaning;
2. Soak in 3-5% analytical pure solution of sodium hydroxide for 30-60 minutes at a temperature of about 40 degrees, which is excellent in an ultrasonic cleaning machine. After soaking, use filtered deionized water or water for injection to flush inside and outside to neutral;
3, soak in 5% nitric acid solution for more than 8 hours, the temperature is about 40 ℃. Excellent in ultrasonic cleaners. After soaking, use filtered deionized water or water for injection to rinse internally and externally to neutral;
4. Organic matter pollution can be cleaned with surfactants, and the cell debris pollution system combined with enzyme cleaning effect is more ideal.
Note: The above methods can be used alone or in combination with each other. If possible, combined with an ultrasonic cleaning machine, the effect is superb.

Company Profile

FAQ

1. who are we?
We are based in Hebei, China, start from 2014,sell to Western Europe(15.00%),North America(14.00%),Mid East(9.00%),Eastern Asia(9.00%),Central America(8.00%),South America(8.00%),Africa(8.00%),Southeast Asia(6.00%),Northern Europe(6.00%),Eastern Europe(6.00%),South Asia(4.00%),Oceania(3.00%),Southern Europe(3.00%),Domestic Market(1.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Filters for Industrial,Filter Element,Filtration Purification Equipment,Cartridge Filter,Filter Cylinder

4. why should you buy from us not from other suppliers?
We are the leading manufacturer of filtration products in Hebei of China. With the advanced equipment and production line, strict quality control system, and professional sales team, we can provide you superior quality and service. Sincerely welcom you!

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES；
Accepted Payment Currency:USD;
Accepted Payment Type: T/T,L/C,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian