Parameters
|
Name |
Digital Dual Temperature Controller |
|
Temperature meauring range |
-55°C~120°C |
|
Resolution |
0.1 |
|
Controlling Accuracy |
1°C |
|
Relay contact current |
10A/240V AC |
|
Temperature Sensor |
NTC10K |
|
Length of cable |
1m |
|
Power supply |
DC 12V/110~220V( choose the one you need ) |
|
Data Save |
YES |
|
Working temperature |
0°C~50°C |
|
Storage Temperature |
-10°C~60°C |
Features:
|
|
|
|
Default |
|
P0 |
1.: Delay start |
0-60 minutes |
0 |
|
P1 |
2.: Delay start |
0-60 minutes |
0 |
|
P2 |
High temperature alarm |
P3~120°C |
120°C |
|
P3 |
Low temperature alarm |
P2~-55°C |
-55°C |
Long press UP button for 3 seconds, 1. display flashes, press UP or DOWN button to set the start temperature(25°C default)
Long press DOWN button for 3 second, the display flashes, press UP or DOWN button to set the stop temperature (40°C default)
Long press UP button for 3 seconds, 2. display flashes, press UP or DOWN button to set the start temperature(25°C default)
Long press DOWN button for 3 second, the display flashes, press UP or DOWN button to set the stop temperature (40°C default)
Press the "Down 1" and "Down 2" button at the same time, the factory setting is restored
Heating Mode--Start temperature
Cooling Mode--Start temperature>Stop temperature
Note:
- There is no any output voltage of the controller , it is like a switch , you need to connect a power supply to the load, then it can work.
Package Content:
- 1 x Dual Digital Thermostat with Dual Sensors
Product display