Product Details

This equipment is a specialized tester used to test the bursting strength of paper under ISO 2758 standard, also it can be used to test the bursting strength of silk, cottons and other non-paper materials.

Features

Touch screen operation, real time dynamic curve display

No film burst and oil leak, much time saving, lower cost

Calibrated by imported calibration tool, equipped with calibration module, free calibration at any time

Single piece sample min grab peak 1.5kg

Specifications

Measure range	50 ~ 1600kpa, ≤±0.5%
Pressure resolution	0.01kpa
Deformation measure deviation	≤1mm
Concentricity of top/bottom plate	≤0.25mm
Pressure of Film Convex Disk	(9±0.2)mm /（30±5)kpa
Oil feeding rate	95±5ml/min
Plate dia.	Top:31.5±0.5mm, bottom: 31.5±0.5mm
Deformation monitor	Three-dimensional Semicircular full-view observation window
Clamping positioning	360° free orientation positioning test probe
Probe control	Intelligent control pressure relief system
Driving mechanism	All-steel chain drive to prevent detection deviation caused by compression deviation
Power source	Full-sealed solid power source
HMI	Touch screen, real time display of test data
Clamping force	100kpa ~ 1200kpa （adjustable）
Units	Kg/cm²,kpa,lbf/in²
Printer set	Modular all-in-one thermal printer
Working condition	Temp.（20±10）℃，RH＜85%
Overall size	400400500mm
Net weight	45kg
Air source	Prepared by customer

Standard configuration

1 host, 4 rolls of printing paper, 1 bottle of silicone oil, 2 low-pressure rubber films, 5 imported Japanese low-pressure correction films, 1 specialized wrench for the burst tester.

Main packing materials test equipments

About us

Our product