DJSF Series DC Energy Meter, buy Acrel rail type 2 circuit DC energy meter for 2 channel charging pile on China Suppliers Mobile

Product Details

DJSF1352-RN rail-mounted DC power meter

Product Description

Characteristic

DJSF1352-RN rail-mounted DC power meter with double DC input channels, designed for telecommunications base

stations, DC charging piles, solar photovoltaic and other applications, this series of meters can measure the voltage, current, power and forward and reverse energy and so on in the DC system.The actual use of the site, you can measure the total power, but also measure the energy within a specified period of time. The test results can be used for local display, but also with industrial control equipment, computers to form a measurement and control system.

The meter can have infrared communication interface and RS-485 communication interface, and supports Modbus-RTU protocol and DLT645-97 (07) protocol at the same time.The meter can have relay alarm output and digital input

function;You can set the ratio, alarm, and communication through the meter panel keys according to different requirements.The meter can have event recording of switch (Modbus protocol), programming and event setting records (645 protocol), instantaneous and timing freeze function of data (645 protocol), maximum and minimum value recording function of voltage and current power.

Specification

Technical parameters			Index
Input	Nominal value	Voltage input range	Current input
				DC0-1000V	Shunt:0-75mV Hall sensor:0-20mA,4-20mA,0- 5V,0-10V
		Overload	1.2 times rated(continuous);2 times rated/1 second;
		Power consumption	Voltage:≤0.2VA, Current:≤0.1VA
Accuracy class			class 1
Function	Display	8-bit segment LCD screen (LCD)
		Communication Interface	RS485, infrared
		Communication protocol	Modbus-RTU，DL/T 645-2007
		Switch	Switch output	2 Relay outputs, 2A/30VDC or 2A/250VAC
				Switch input	2 dry contact inputs
		Pulse output	A second pulse output, a energy pulse output
				See the SYS->PLUS display in the meter menu settings. For example: The meter displays 100, which is 100imp/kWH
Power Supply	Voltage range	AC/DC 85-265V or DC24V(±10%) or DC48V(±10%)
		Power consumption	≤ 3W
Power frequency withstand voltage			Power supply // Voltage input // Current input // Relay output and switch input // Communication interface / / Pulse output 3kV/1min Power supply // Relay output // Voltage input // Current input 3kV/1min Pulse output // Communication interface // Switch input 2kV/1min
Insulation resistance			≥ 40M Ω
Average barrier-free working hours			≥50000h
Environment	Temperature	Normal operating temperature: -25 °C ~ +55 °C; Limit working temperature: -40 °C ~ +70 °C; Storage temperature: -40℃～+70℃
		Humidity	≤93%RH, no condensation, no corrosive gas
		Altitude	≤2500m

Certificate

Installation

Product installation

The meter is designed by standard DIN35mm rail mounted.

Terminals and wiring

Note: The second DC input channel and DI and DO functions are optional. When the current input mode is current shunt input:

More Type

Type	Function	FOB Shanghai(USD)
DJSF1352-RN	1. DC voltage, current, power measurement 2. Forward and reverse energy measurement 3. RS485 and infraredCommunication 4. Time sharing and multi rate energy measurement 5. SOE Sequence Of Event record	103.6
DJSF1352-RN/K	On the basis of DJSF1352-RN, add the switch function(2DI/2DO)	124.4
DJSF1352-RN/D	On the basis of DJSF1352-RN, add the second channel of energy measurement	124.4
DJSF1352-RN/KD	On the basis of DJSF1352-RN, add the second channel of energy measurement and switch function(2DI/2DO)	145

Packing & Delivery

Company Profie