AAAC,AAC,ACSR Bare Conductor:

Type:

(1) all aluminium conductor (AAC)

(2) all aluminimum alloy conductor(AAAC)
(3) aluminum conductor steel reinforced (ACSR)
(4) anti-corrosion type ACSR
(5) aluminimum conductor aluminimum clad steel reinforced(ACSR/AW)

(6)rear earth aluminimum conductor steel reinforced(ACSR/RE)

(7)aluminimum conductor aluminimum alloy reinforced(ACAR)

 

• Relative Standard:

All Aluminum Conductor(AAC)& Aluminum Conductor Steel Reinforced(ACSR))for ASTM (AAC, ACCR, AAAC, ACSR) Generally Confirming to IS 398 (Part-I, II, IV), IEC-228
(AAAC) Conductor as per ASTM-B-399-1992
(AAAC) Conductor as per BS-3242-1970
(AAAC) Conductor IS: 398-IV-1994
(ACSR) as per ASTM-B-233-1992
(AAC) as per BS-215-1-1970
(AAC) as per IS-398-1: 1976
(AAC) as per ASTM-B-231-1990
(ACSR) as per IS: 398-II: 1976 & IS: 398-V: 1992
(ACSR) BS-215-II-1970
(AACSR) as per IEC-1089-1191

• AAAC Conductor (All Aluminum Alloy Conductors):

1). Standard: BS EN50182, ASTM B399, DIN48201 part6, BS 3242

 

2). Specification: AAAC are composed by bare concentric-lay-stranded aluminum alloy wires.

 

3). Application: AAAC are used in overhead electric power transmission and distribution lines.

 

4).Construction:
Standard 6201-T81 high strength aluminum conductors, conforming to ASTM Specification B-399, are concentric-lay-stranded, similar in construction and appearance to 1350 grade aluminum conductors.

Standard 6201 alloy conductors are similar to other alloy conductors commercially known as Ardival, Aldrey or Almelec. They were developed to fill the need for an economical conductor for overhead applications requiring higher strength than that obtainable with 1350 grade aluminum conductors, but without a steel core.

The DC resistance at 20"C of the 6201-T81 conductors and of the standard ACSR of the same diameter are approximately the same. Conductors of the 6201 J81 alloys are harder and, therefore, have a greater resistance to abrasion than conductors of 1350-H 19 grade aluminum 

 

5.Packing: Strong Wooden Drum or Iron Wooden Drum.

 

The data sheets below show the most common standards, British standard and IEC standard.
IEC Sizes IEC 61089

Code Number	Stranding&wire  diameter	Approx  Overall diameter	Nominal	Approx.	Breaking  Load	DC Resistance  at 20
			area	Weight
	mm	mm	mm 2	Kg/km	KN	Ohm/km
16	7/1.83	5.49	18.4	50.4	5.43	1.7896
25	7/2.29	6.86	28.8	78.7	8.49	1.1453
40	7/2.89	8.68	46	125.9	13.58	0.7158
63	7/3.63	10.9	72.5	198.3	21.39	0.4545
100	19/2.78	13.9	115	316.3	33.95	0.2877
125	19/3.10	15.5	144	395.4	42.44	0.2302
160	19/3.51	17.6	184	506.1	54.32	0.1798
200	19/3.93	19.6	230	632.7	67.91	0.1439
250	19/4.39	22	288	790.8	84.88	0.1151
315	37/3.53	24.7	363	998.9	106.95	0.0916
400	37/3.98	27.9	460	1268.4	135.81	0.0721
450	37/4.22	29.6	518	1426.9	152.79	0.0641
500	37/4.45	31.2	575	1585.5	169.76	0.0577
560	61/3.67	33	645	1778.4	190.14	0.0516
630	61/3.89	35	725	2000.7	213.9	0.0458
710	61/4.13	37.2	817	2254.8	241.07	0.0407
800	61/4.38	39.5	921	2540.6	271.62	0.0361
900	91/3.81	41.8	1036	2861.1	305.58	0.0321
1000	91/4.01	44.1	1151	3179	339.53	0.0289
1120	91/4.25	46.7	1289	3560.5	380.27	0.0258
1250	91/4.49	49.4	1439	3973.7	424.41	0.0231