uhmwpe wear strip

uhmwpe wear strips and profiles are extruded from virgin uhmwpe and are available in a wide range of shapes and sizes to suit different applications. These cut-to-length profiles, with the ability to hold close tolerances, are a viable alternative to custom-machined components, as they offer significant cost reductions.

uhmwpe is an exceptional profile material for high impact, wear and sliding applications and will perform under the most extreme conditions of wear and environment. It has the best impact strength of any modern thermoplastic, is highly resistant to abrasion and has a very low co-efficient of friction. It absorbs virtually no water, which enables it to be used in high moisture environments. uhmwpe also meets FDA requirements for food contact, is self-lubricating and has very good sound dampening properties.

uhmwpe wear strips are used in sliding applications where metal-to-metal contact causes friction or abrasion wear. They can be planed, drilled, slotted or bevelled, and are extruded in a wide variety of profiles to suit individual applications. U-channels are primarily used for under-chain wear guides or cable tracks; right-angled profiles are used as chain guides to reduce wear and power needs. Other thermoplastics are available for profile extrusions.

Temperature range: -269ºC to +70ºC

Benefits:

Outstanding Impact Strength

High abrasion resistance

Low co-efficient of friction

Minimal water absorption

No metal-to-metal contact

Sound dampening propeties

Suitable for food contact