Wear strip must be made of such material which should not break, should not wear out quickly and protect the material above it. Further, anti-sticking and self-lubricating properties of UHMWPE makes it the most desired product to be used in wear strips.

UHMWPE Sheets and Components:

Very Low Co-efficient of Friction

High Impact Strength, will not break or shatter

High Abrasion Resistance

Zero Water Absorption

Chemical Inert, Works with almost all chemical including HCL

Survive in Freezing Conditions from (-200 Degree C to 80 Degree C)

USDA/FDA Approved

Anti Sticking Property

Self Lubricated Material

UHMWPE advantages:
1. wear resistance
2. impact resistance
3. corrosive resistance
4. low temperature resistance

UHMWPE wear strip is cut from UHMWPE sheet semis. Usually for UHMWPE application, customers will need only some strips instead of sheets or slabs or so by demands, Xinxing Ultrahigh will glad to cut UHMWPE sheet/slab semis into strips as well as the UHMWPE semis production such as sheets, blocks, strips, slabs and rods etc.

Whether for usage of UHMWPE machining or lining system or some other occasions, it is just the UHMWPE properties that attract all customers to utilize UHMWPE material.

Some characteristics of UHMW polyethylene have been listed as following:

1. High abrasion resistance - 7 times outwearing carbon steel, long life-span.

2. Low coefficient of friction - self-lubricating.

3. Low moisture absorption - non-caked.

4. High impact strength - comprehensive mechanical properties.

5. High resistant to corrosive chemicals - no ageing.

6. Low temperature resistance

7. Non-toxic.

8. Electrical insulating.

9. Lightweight - 1/8 the weight of carbon steel. 

UHMWPE Applications:

Best material as liners for bulk storage and transportation equipments, for instance hoppers and chutes etc. UHMWPE strips are widely applied to power plants, steel companies, mine and machinery areas, granaries, glass industries, self-unloading ships and so on.

Also, to be machined into wear parts/components, such as conveyor guide rails, belt scrapers, chain guides and suspension wear plates etc., UHMWPE strips can be machined into various types to get special purposes in a variety of industries even food & beverage lines.

3000x70x15mm, 3000x150x15mm, 4000x50x12mm, 4000x100x15mm

white, black, yellow, blue, green, grey, orange, red

Our UHMWPE wear strips can be widely used for long-term maintenance-free purposes. This UHMWPE profile can be applied to office equipment, textile machinery, pneumatic components, fitness equipment, printing machinery, micro-motors, automobiles, agricultural machinery, cement grout pumps, port machinery, and other applications that require corrosion-resistant sliding parts.