Product Details

Product Description

Now a lightweight wall panel machine is totally new and hot in the world. It is now replacing traditional building materials in the structure. attached is an apartment under construction which is just built by our machine produced lightweight wall panels.

The light weight EPS wall panel,also called compound sandwich wall panel, precast wall board and panel,etc, is a new developed wall building material which is made by cement, sand,fly ash and other materials and additives,in recent years and now is popularly wide used around the world in the construction filed.

Automatic raw material feeding --metering -mixing system, accurate measurement to ensures proportion stability The Mixer is double -shaft, the blade is only 3mm to the mixer wall so that can guarantee mixing even., no slurry leakage , automatic oil filling maintenance. The mixer is sealed， so there is only a small quantity dust and no need dust collector, so that can help you save cost. " For big capacity, we will equip second mixer to increase the production capacity.

Vertical mold car

Panel type: sandwich wall panel/solid wall panel

Panel size: 2400-3000*610*50-200mm

Unloading device: hanging crane/frame crane

Solid wall panel

For the Solid core panel, compared to sandwich wall panel, solid wall panel don't have surface board, other raw materials are almost the same, so it is much more easier to produce.

Raw material	cement, sand, fly ash, eps, ceramsite, chemical additives
Advantage	higher bending strength, lightweight, waterproof, fireproof, heat insulation, good sound insulating effect, lower production cost
Application	internal and external non load bearing, integrated housing, villas etc

Sandwich wall panel

For the sandwich wall panel ,its raw materials are calcium silicate board，cement, sand, fly ash, eps particle, ceramsite and chemical additives. since there are the calcium silicate board on the surface, so if you need this kind of panel, then you need to make sure if you could easily find the calcium silicate board locally.

Raw material	Calcium silicate board, cement, sand, fly ash, eps, ceramsite, chemical additives
Advantage	higher bending strength, lightweight, waterproof, fireproof, heat insulation, good sound insulating effect, lower production cost
Application	internal and external non load bearing, integrated housing, villas etc

Machinery System

Raw material Automatic feeding and metering system

Machine part: Automatic Material feeding and metering system

Introduce :1.Cement ,flyash,EPS particels will be metering and feeding into the mixer automatically to save the labors and improve
working efficiency also it is more environmentally .
2.Sand (or ceramsite /slag /pumice stone other agregate) and additives will be feeding into the mixer by lifting hopper

Platform type : 1.Metering platform,
2.Mixing platform (necessary),
3.Casting platform (necessary),
4.Electric control cabinet platform ,
5.Auxiliary Platform /Calcium Silicate Board installation platform
Besides necessary platform , other platform we can equip as client requirement .

Raw material automatic mixing system

Machine part: Double-shaft mixer
Capacity available :1.2/1.5/2.0/2.5/3.0/3.5 sqm
Introduce:the mixer capacity is related to the mould car quantity , so we will equip the mixer after confirm the capacity with client . so that can makre sure our proposal is suit to you .
Features: the double shaft is to blend the raw material more even ,also save time . different capacity to satisfy different
client's requirement .

Machine part:Second mixing mixer

Unique feature :If the mould car quantity is more than 10 units ,then we will equip the second mixing mixer, so as to save the
mixing time of the first mixer and improve working efficiency ,increase productivity .

Note: normally use one-shaft mixer ,only large capacity will equip second mixing if small capacity ,second storage hopper is
enough

Automatic forming system

Machine part:Pump+pipe

Introduce : After the mixer mix the raw material well then the workers use the pump and pipe to cast the slurry into the mould car

Features:The pump is to make the pouring more even, no need to vibrate, and the working platform will be clean and the material
will not be wasted.

EPS forming system

Machine part:The Boiler system

Introduce:The boiler will supply heat for EPS foam

Feul:coal (need burner),gas ,oil

Machine part: EPS foaming machine

Introduce:It will foam the eps by boiler supply heat and foam the EPS into the requested size .

Note: If you can buy foamed EPS particles locally ,then this parts no need

Advantages of Full automatic precast wall board machine lightweight eps concrete sandwich wall panel making machine

1.The weight is more lighter
2.The thickness of wall more thinner
3.More easy to install, take a modular assembly, saving installation time
4. Higher strength, more anti-aging
5. Higher energy efficiency
6.More waterproof
7.The fireproof performance meets the national A standard and it is non-combustible;
8.Non-toxic, harmless, non-polluting, non-radioactive, it is a green building material

Our Philosophy

We are not selling the board or selling the machine
What we focus is customers demands,keep innovation,keep updating,meet or transcend customers requirements.
What we provide is not only the machine,but the whole system

FAQ

Questions you may concerned
Q: How long is the warranty of your equipment?
A: 1year
Q: Do you supply spare parts?
A: Excellent easy broken parts support for buyers. Easy broken parts guarantee for one year.
Q: Will you provide training?
A: The training is free of charge , and our engineer will be on duty to train your worker.
Q: How will you provide installation&commissioning
A: Will provide 2~8 persons(adjustable according to the degree of automatic )for installation. Engineers team will go with your
project.
Q:How long time for the installation and commissioning
A: depend on configuration normally only need 15-25days. Including workers training.
Warmly welcome you contact me for your questions.

Contact Supplier