hydraulic power unit dc 12v 1.6kw for manual electric stacker
Specifications of 12V 24V Hydraulic Power Unit :
Type | MOTOR DC | Pump displacement | Tank capacitiry | Pressure | Mounting | oil port | L(mm) |
HPU-10ADALHAFGF | 12V 1.6KW 2500RPM | 1.6 | 5 | 20 | Lateral Horizontal | 3/8*NPT | 270 |
HPU-10ADAMHAFHF | 12V 1.6KW 2500RPM | 2.1 | 6 | 20 | Lateral Horizontal | 3/8*NPT | 300 |
HPU-10BEAMHAFHF | 24V 2.2KW 2500RPM | 2.1 | 6 | 20 | Lateral Horizontal | 3/8*NPT | 300 |
HPU-10BEANHAFJF | 24V 2.2KW 2500RPM | 2.6 | 8 | 20 | Lateral Horizontal | 3/8*NPT | 370 |
1.The different pump displacement, motor power, tank capacity are available on request.
Special Note
1. The duty of this power unit is S3. ie: 30 seconds on and 270s off.
2. Clean all the hydraulic parts concemed before mounting the power unit.
3. Viscosity of the hydraulic oil should be 15-68 cst, which should also be clean and free of ompurities. N46 hydraulic oil is recommended.
4. This power unit should be mounted horizontal.
5. Check the oil level in the tank after the first start of the power unit.
6. Oil changing is required after the initial 100 operation hours afterwards once every 3000 hours.
For customization, please tell me the following specifications:
Voltage
motor power
single action or double action
with or withour pressure holding
Single oil cylinder or multiple oil cylinder
gear pump displacement mL/r
flow rate L/min
Pressure( Mpa)
oil tank capacity
vertical or horizontal
square or round
voltage of solenoid valve
High quality hydraulic power pack unit DC
1,Sample service: samples can provide preferential.
2,customized services: a variety of power unit packs can be customized according to customer demand.
3, aftermarket service: according to consumer requirements, technical guidance on the use and other aspects. In case of quality problems under normal use, free replacement within one year of free maintenance for life.
12VDC 1.6KW 24V 2.2KW Hydraulic Power Packs For Manual Eectric Sacker
Q: Do you accept OEM manufacturing?
A: Yes! We do accept OEM manufacturing. You could give us your samples or drawings.
Q: Can we design our own package or print our own logo?
A: Yes! You could! Package will be acording to your requirements?
Q: Could we get samples?
A: Yes! Definitly! The samples will be sent to you preferentially.
Q: How much time about the mass production?
A: The lead time of mass production will depend on quantity, production and so on. Often 30 days.
Q: Could I customize our products in your factory?
A: Customization is available. You can send me your specifications and drawings.
Wechat ID:
You May Like
- trailer 12 volt hydraulic power units
- china hydraulic power unit 380v for dock leveler
- hydraulic power pack unit 12v 24v for trailer
- tipper trailer 12V 2kw Power Supply Units
- 380Volt dock leveler hydraulic power pack
- 12v 2kw chinese factory power units for tail gate for car lift
- dump truck power unit 12V
- small 12 volt hydraulic power unit for tipper trailer
- 800w mini hydraulic power units used For Wheel Chair
- DC hydraulic power packs sale
Popular Searches
Find Similar Products By Category
You May Like
- 12v 24v China Hydraulic Power Unit For Forklift
- 12v 24v China Hydraulic Power Unit For Forklift
- dc 12v hydraulic power pack/power unit used for snow plow
- 24Volt hydraulic power unit/mini power pack used for snow plow
- 24v hydraulic power unit for snow plow from alibaba china supplier
- hydraulic power pack 240v for auto hoist
- high efficient Hydraulic Power Unit Pack with 12 volt DC Motor
- high efficient Hydraulic Power Unit Pack with 12 volt DC Motor
- Forklift lifting Power Pack Unit with hydraulic pump dc motor
- 12v Power supply Pack Unit Hydraulic for fork lift
- 12v 1.5kw and 24v 2kw 2.2kw 4kw Power Pack Unit Hydraulic pump
- hydraulic power pack for auto hoist with 240VAC
- Tail lift hydraulic power unit 24v dc
- 24volt hydraulic power unit for tail lift / lift gate / truck rear lift
- hydraulic power pack for truck tail lift / rear lift / lift gate