ALUMINIUM CONDUCTORS STEEL REINFORCED (ACSR)

This conductor consists of a solid or stranded steel core surrounded by strands of aluminium (E.C. GRADE). ACSR CONDUCTOR is available in a wide range of steel varying from as low as 6% to as high as 40 %. The higher strengthACSR CONDUCTORS are used for river crossings, overhead ground wires, installations  involving extra long spans etc.. against any given resistance of conductor, ACSR conductormay be manufactured for having a wide range of tensile strength as per requirement. The principal advantage of these conductors are high tensile strength and light weight with longer spans as well as with lesser supports. Due to the greater diameter of ACSR CONDUCTORS a much higher

corona limit can be obtained causing big advantages on high as well as extra high voltage overhead lines.

ALL ALUMINIUM ALLOY CONDUCTORS (AAAC) 

This conductor is made from aluminium-magnesium-silicon alloy of high electrical conductivity containing enough magnesium silicide  to give it better mechanical properties after treatment. These conductors are generally made out of aluminium alloy 6201. AAAC CONDUCTOR has a better corrosion resistance and better strength to weight ratio and improved electrical conductivity than

ACSR CONDUCTOR on equal diameter basis.

ALL ALUMINIUM WIRES

These wires are manufactured from E.C.Grade aluminium.The company supplies wires in hard drawn, half-hard, and annealed condition, depending upon the clients requirements. These wires are sold to a variety of clients like wire and cable manufacturers, Winding wire manufacturers, and a wide variety of miscellaneous engineering applications.

BARE ALUMINIUM ALLOY WIRE

These wires are made from a wide range of aluminium alloys, depending on the customer requirements. These wires are sold to manufacturers of eyelets, rivets, nails, screws and other various products.

STANDARDS

All our products are manufactured as per specifications / standards specified by our clients. We had manufactured our products as per BS, DIN, ASTM, JIS, BIS standards. We also undertake manufacture of our products as per the clients specifications.

 

Aluminum Conductors Steel Reinforced         ASTM B 232
Code name	Area				Stranding and wire diameter		Approx. overall diameter /mm	Weight			Nominal breaking load /kN	Nominal DC resistance at 20 deg. Ohm/km
	Nominal AWG or MCM	Alum. /mm²	Steel/mm²	Total /mm²	Alum. /mm	Steel /mm		Alum. kg/km	Steel kg/km	Total kg/km
	4	21.16	3.55	24.71	6/2.12	1/2.12	6.36	58	27	85	8.32	1.3557
SWANATE	4	21.16	5.35	26.51	7/1.96	1/2.61	6.53	58	42	100	10.53	1.3557
SPARROW	2	33.61	5.61	39.22	6/2.67	1/2.67	8.01	92	44	136	12.7	0.8535
SPARATE	2	33.61	8.52	42.13	7/2.47	1/3.30	8.24	92	67	159	16.11	0.8535
RAVEN	1/0	53.48	8.9	62.38	6/3.37	1/3.37	10.11	147	69	216	19.32	0.5364
QUAIL	2/0	67.42	11.23	78.65	6/3.78	1/3.78	11.34	185	88	273	23.62	0.4255
PIGEON	3/0	85.03	14.19	99.22	6/4.25	1/4.25	12.75	233	110	343	29.41	0.3373
PENGUIN	4/0	107.23	17.87	125.1	6/4.77	1/4.77	14.31	294	139	433	37.06	0.2675
PARTRIDGE	266.8	135.16	22	157.16	26/2.57	7/2.00	16.28	374	172	546	50.29	0.2143
MERLIN	336.4	170.45	9.48	179.93	18/3.47	1/3.47	17.35	470	74	544	38.23	0.1691
LINNET	336.4	170.45	27.81	198.26	26/2.89	7/2.25	18.31	472	217	689	62.71	0.1699
ORIOLE	336.4	170.45	39.81	210.26	30/2.69	7/2.69	18.83	473	311	784	77.27	0.1704
IBIS	397.5	201.42	32.77	234.19	26/3.14	7/2.44	19.88	558	256	814	72.11	0.1438
LARK	397.5	201.42	46.97	248.39	30/2.92	7/2.92	20.44	560	367	927	88.69	0.1442
PELICAN	477	241.68	13.42	255.10	18/4.14	1/4.14	20.70	666	105	771	52.16	0.1193
FLICKER	477	241.68	31.29	272.97	24/3.58	7/2.39	21.49	670	245	915	76.66	0.1199
HAWK	477	241.68	39.42	281.10	26/3.44	7/2.67	21.79	670	308	978	86.65	0.1199
HEN	477	241.68	56.39	298.07	30/3.20	7/3.20	22.40	671	441	1112	105.34	0.1201
OSPREY	556.5	282.00	15.68	297.68	18/4.47	1/4.47	22.35	777	122	899	60.88	0.1022
PARAKEET	556.5	282.00	36.58	318.58	24/3.87	7/2.58	23.22	781	286	1067	88.22	0.1027
DOVE	556.5	282.00	45.94	327.94	26/3.72	7/2.89	23.55	781	359	1140	101.03	0.1027
EAGLE	556.5	282.00	65.81	347.81	30/3.46	7/3.46	24.21	783	515	1298	122.92	0.103
PEACOCK	605	306.58	39.74	346.32	24/4.03	7/2.69	24.20	849	311	1160	95.88	0.0945
SQUAB	605	306.58	49.94	356.52	26/3.87	7/3.01	24.51	850	390	1240	108.14	0.0945
TEAL	605	306.58	69.87	376.45	30/3.61	19/2.16	25.24	851	548	1399	133.59	0.0947
GROSBEAK	636	322.26	52.45	374.71	26/3.97	7/3.09	25.15	893	409	1302	111.8	0.08989
STARLING	715.5	362.58	59.03	421.61	26/4.21	7/3.28	26.68	1005	461	1466	125.91	0.07989
TERN	795	402.84	27.87	430.71	45/3.38	7/2.25	27.03	1116	217	1333	97.37	0.07191
CONDOR	795	402.84	52.19	455.03	54/3.08	7/3.08	27.72	1116	408	1524	124.45	0.07191
CUCKOO	795	402.84	52.19	455.03	24/4.62	7/3.08	27.74	1116	408	1524	123.94	0.07191
DRAKE	795	402.84	65.61	468.35	26/4.44	7/3.45	28.11	1116	512	1628	139.92	0.07191
MALLARD	795	402.84	91.87	494.71	30/4.14	19/2.48	28.96	1119	719	1838	171.18	0.07208
RAIL	954	483.42	33.42	516.84	45/3.70	7/2.47	29.61	1339	262	1601	115.63	0.05992
CURLEW	1033.5	523.68	67.87	591.55	54/3.52	7/3.52	31.68	1451	530	1981	161.8	0.05531
BLUEJAY	1113	563.93	39.03	602.96	45/4.00	7/2.66	31.98	1563	305	1868	132.63	0.05136
FINCH	1113	563.93	71.55	635.48	54/3.65	19/2.19	32.85	1570	560	2150	174.41	0.05161
GRACKLE	1192.5	604.26	76.58	680.84	54/3.77	19/2.27	33.97	1682	600	2282	186.38	0.04817
BITTERN	1272	644.51	44.52	689.03	45/4.27	7/2.85	34.17	1785	349	2134	151.48	0.04494
DIPPER	1351.5	684.84	47.10	731.94	45/4.40	7/2.92	35.16	1898	368	2266	160.7	0.0423
MARTIN	1351.5	684.84	86.71	771.55	54/4.02	19/2.41	36.17	1906	679	2585	206.05	0.0425
LAPWING	1590	805.68	55.48	861.16	45/4.77	7/3.18	38.16	2232	435	2667	187.02	0.03595
FALCON	1590	805.68	102.13	907.81	54/4.36	19/2.62	39.26	2243	799	3042	242.55	0.03613
DOTTEREL	176.9	89.48	52.19	141.67	12/3.08	7/3.08	15.42	248	409	657	78.5	0.3237
DORKING	190.8	96.71	56.39	153.10	12/3.20	7/3.20	16.03	268	441	709	84.8	0.2995
COCHIN	211.8	107.10	62.45	169.55	12/3.37	7/3.37	16.84	297	488	785	93.9	0.2705

 

 

Aluminum Conductors Steel Reinforced           BS 215 Part 2
Code name	Area				Stranding and wire diameter		Approx. overall diameter	Weight			Nominal breaking load	Nominal DC resistance at 20 deg.
	Nominal	Alum.	Steel	Total	Alum.	Steel		Alum.	Steel	Total
	mm2	mm2	mm2	mm2	mm	mm	mm	kg/km	kg/km	kg/km	kN	Ohm/km
MOLE	10	10.62	1.77	12.39	6/1.50	1/1.50	4.50	29	14	43	4.14	2.076
SQUIRREL	20	20.94	3.49	24.43	6/2.11	1/2.11	6.33	58	27	85	7.88	1.368
GOPHER	25	26.25	4.37	30.62	6/2.36	1/2.36	7.08	72	34	106	9.61	1.093
WEASEL	30	31.61	5.27	36.88	6/2.59	1/2.59	7.77	87	41	128	11.45	0.9077
FOX	35	36.66	6.11	42.77	6/2.79	1/2.79	8.37	101	48	149	13.2	0.7822
FERRET	40	42.41	7.07	49.48	6/3.00	1/3.00	9	117	55	172	15.2	0.6766
RABBIT	50	52.88	8.82	61.7	6/3.35	1/3.35	10.05	145	69	214	18.35	0.5426
HORSE	70	73.37	42.8	116.17	12/2.79	7/2.79	13.95	203	335	538	61.2	0.3936
RACOON	75	79.2	13.2	92.4	6/4.10	1/4.10	12.3	217	103	320	27.2	0.3622
OTTER	80	83.88	13.98	97.86	6/4.22	1/4.22	12.66	230	109	339	28.80	0.3419
CAT	90	95.40	15.90	111.30	6/4.50	1/4.50	13.50	262	124	386	32.70	0.3007
HARE	100	105.00	17.50	122.50	6/4.72	1/4.72	14.16	288	137	425	36.00	0.2733
DOG	100	105	13.5	118.5	6/4.72	7/1.57	14.15	288	106	394	32.7	0.2733
TIGER	125	131.1	30.6	161.7	30/2.36	7/2.36	16.52	362	240	602	58	0.2202
WOLF	150	158	36.9	194.9	30/2.59	7/2.59	18.13	437	289	726	69.2	0.1828
LYNX	175	183.4	42.8	226.2	30/2.79	7/2.79	19.53	507	335	842	79.8	0.1576
CARACAL	175	184.2	10.3	194.5	18/3.61	1/3.61	18.05	507	80	587	41.1	0.1563
PANTHER	200	212	49.5	261.5	30/3.00	7/3.00	21	586	388	974	92.25	0.1363
BEAR	250	264	61.6	325.6	30/3.35	7/3.35	23.45	730	483	1213	111.1	0.1093
BISON	350	381.8	49.5	431.3	54/3.00	7/3.00	27	1056	388	1444	120.9	0.07573
DEER	400	429.3	100.2	529.5	30/4.27	7/4.27	29.89	1186	785	1971	178.5	0.06726
ZEBRA	400	428.9	55.6	484.5	54/3.18	7/3.18	28.62	1186	435	1621	131.9	0.0674
MOOSE	500	528.7	68.5	597.2	54/3.53	7/3.53	31.77	1462	537	1999	161.1	0.0547