Product Details

0.6/1kv xlpe overhead all aluminum cable AAC conductor

Specification: aac are composed by bare concentric-lay-standed aluminum wires with a straight round central aluminum wire surrounded by one or more layers of helically layed aluminum wires.

Application:

*AAC are used in overhead power transmission and distribution lines with various grade voltages.

*Under the same weight,AAC is with higher DC resistance and lower costthan copper conductor.

*Aluminum is light and is easy to lay.

Stranded 1350 aluminum conductors shown in this section of data are classified, as follows:

Class AA	For bare conductors usually used in overhead lines.
Class A	For conductors to be covered with weather-resistant materials and for bare conductors where greater flexibility is required.
Class B	For conductors to be insulated with various materials and for conductors indicated under Class A where greater flexibility is required.
Class C	For conductors where greater flexibility is required

Compact strand conductor for use in bare overhead applications or for use with weather-resistant coverings or insulations is also available.

Note: Classes refer to stranding and are an indication of relative conductor flexibility, AA being the least flexible, C the most flexible.

AAC bare conductors meet or exceed the following ASTM specifications:

B-230 Aluminum Wire, 1350-H119 for Electrical Purposes
B-231 Aluminum Conductors, Concentric-Lay-Stranded
B-400 Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors concentrically stranded.

Nominal area (sqmm)	Strand and Wire diameter	Calculated Section Area	Approx. Overall Diameter	D.C. Resistance Not Exceed(Ohm/KM)	Calculated breaking load(kg/km)	Calculated weight(kg/km)	Delivery length (meter)
16	7/1.70	15.89	5.10	1.802	2840	43.5	4000
50	7/3.00	49.48	9.00	0.5786	7930	135.5	1500
120	19/2.85	121.21	14.25	0.2373	19420	333.5	1500
400	37/3.70	397.83	25.90	0.07247	61150	1097	1000