Descriptions of NUKR series cam follower bearings 

NUKR series steel stud-type cam follower bearing with labyrinth seals and cylindrical rollers is designed for cam- and track-type applications, and supports high radial loads and axial loads resulting from slight misalignments. It has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads, and a contoured outer surface that helps evenly distribute loads when misalignments occur. This cam follower has a threaded stud-type design for through-hole or threaded mounting, and a hexagonal hole on the flange end that provides greater holding power during mounting than a screwdriver slot. This cam follower holds a full complement of cylindrical rollers for a higher radial load-carrying capacity than caged rollers. The cylindrical rollers and ribs provide axial guidance to the outer ring. Labyrinth seals on both sides of the bearing retain a lithium complex soap grease lubricant applied at manufacture and help protect against contaminants .The cam follower is made of low alloy, through-hardened chromium steel for durability and heat tolerance, and has lubrication holes on the stud’s flange side and thread-side end face for reapplying lubricant. It includes loose drive-fit lubrication nipples. Operating temperatures range from -30 to +140 degrees C. This cam follower is suitable for use in a broad range of applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Genernal information of NUKR47 Cam follower bearing

NUKR47 Stud Type Track Rollers are designed to run on all types of tracks and to be used in cam drives, conveyor systems, etc. These bearings have a thick-walled outer ring, which enables them to accommodate high radial loads, while reducing distortion and bending stresses.

The outer ring running surface is crowned as standard. This is beneficial for applications where angular misalignment relative to the track may occur or where edge stresses need to be minimized. With the exception of single row cam rollers, NUKR47 Stud Type Track Rollers are also available with a cylindrical (flat) outer ring running surface.

Specifications of NUKR47 Cam follower bearing

  Materials:
Material for needle roller is GCr15 bearing steel, quench-hardening HRC60---65.
Material for inner and outer races is GCr15 bearing steel or carburizing steel.
Material for cages is quality low-carbon steel or reinforced nylon.

Special Directions:
Outer race surface of supporting roller is arc form so as to avoid rim stress.
Limited by plastic cages (suffixed with TN) and sealing-element material, operating temperature is -300C---+1000C.

NUKR series cam follower bearings 

 Product pictures showing

Company Profile

Jinan Kelunte Bearing Co.,Ltd was established in 2010 which is located in Fenghuangshan Electricity Industrial Park,Tian Qiao Distirct,Jinan city.Our company is a modern enterprise which combines bearing marketing and production.Our factory covers an area of 10,000 square metres and our plant covers more than 5000 square meters.Our company initroduced our own brand CLUNT.Equiped with modern prodution equipment and advanced inspection equipment, our products are mainly for the high-end market.Our main products:pillow block bearings,deep groove ball bearings,taper roller bearings,linear bearings,cylinderical roller bearings,precision machine tool spindle bearings,spherical roller bearings,ect.Our products are widely used in autombiles,high presion motors,speed reducer,vibrating screen,crusher,railway,etc.

Jinan Kelunte Bearing Co.,Ltd takes specialization as core strategy,promoting internationalizion and diversification.Our company devotes to achive domestic and international advanced level.

Jinan Kelunte Bearing C.,Ltd has been a respected and excellet enterprise in bearing industry.We will keep moving forward.