Descriptions of NUKR series cam follower bearings 

NUKR series steel stud-type cam follower bearing with labyrinth seals and cylindrical rollers is designed for cam- and track-type applications, and supports high radial loads and axial loads resulting from slight misalignments. It has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads, and a contoured outer surface that helps evenly distribute loads when misalignments occur. This cam follower has a threaded stud-type design for through-hole or threaded mounting, and a hexagonal hole on the flange end that provides greater holding power during mounting than a screwdriver slot. This cam follower holds a full complement of cylindrical rollers for a higher radial load-carrying capacity than caged rollers. The cylindrical rollers and ribs provide axial guidance to the outer ring. Labyrinth seals on both sides of the bearing retain a lithium complex soap grease lubricant applied at manufacture and help protect against contaminants .The cam follower is made of low alloy, through-hardened chromium steel for durability and heat tolerance, and has lubrication holes on the stud’s flange side and thread-side end face for reapplying lubricant. It includes loose drive-fit lubrication nipples. Operating temperatures range from -30 to +140 degrees C. This cam follower is suitable for use in a broad range of applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Genernal information of  Stud track roller bearings NUKR40 

NUKR40 Stud Type Track Rollers are designed to run on all types of tracks and to be used in cam drives, conveyor systems, etc. These bearings have a thick-walled outer ring, which enables them to accommodate high radial loads, while reducing distortion and bending stresses.

The outer ring running surface is crowned as standard. This is beneficial for applications where angular misalignment relative to the track may occur or where edge stresses need to be minimized. With the exception of single row cam rollers, NUKR40 Stud Type Track Rollers are also available with a cylindrical (flat) outer ring running surface.

Specifications of Stud track roller bearings NUKR40  

NUKR series cam follower bearings 

 Product pictures showing

About us                                                                                                                            

1.Staff mission: to develop, innovation, cooperation and good faith. 
2,Company's goals: a hundred years the name Enterprise, the industry fresh air. 
3,Staff objectives: Choi-chi, with a minor, win-win progress. 
4,Business philosophy: science and technology, quality, service, win-win situation. 
5,Service spirit: Dissemination of cutting-edge technology together to create wealth. 
6,Staff spirit: innovation, cooperation, sincerity and dedication. 
7,Development strategy: the internationalization of enterprises to enter the brand name. 
8,The core concept: the market conception of qualified personnel, learning concept 

Main bearing products                                                                                                       

 Deep groove ball bearing: 6000series, 6100series, 6200series, 6300series, 6400 series, 6800 series,6900 series, etc.

 Angular contact ball bearing: 7100series, 7200series, 7300series, 7400series, etc.

 Taper roller bearing: 30000series, 31000series, 32000series, 33000 series.

 Spherical roller bearing: 20000series, 21000series, 22000series, 23000series.

 Cylindrical roller bearing: N series, NU series, NJ series, etc.

 Pillow block bearing: UC series, UCP series, UCF series, UCFL series.

 Self aligning ball bearing: 1200series, 1300series, 2200series, 2300series. 

 Needle Roller Bearing   

 Sliding bearing   

 Slewing Bearing

 Rod End Joint Bearing  

 Ceramic Bearing  

 Bearing Accessories

Excellent and high quality control                                                                                                         

1.Rich Inventory to mostly shorten the delivery time

2.Package design as clients' requirement

3.Providing the most economic carriage solution

4.OEM manufacturing supplied(Including clients' own brand)

5.Produce as drawings provided by clients

6.Design drawings as specifications and applications

7.Preferred payment term:T/T;Paypal;Western Union

Through the organized quality assurance system, our company strive to accomplish         

a. Fullfill it's commitment towards quality products,

b. Efficient delivery time, generally 3-7 days,

c. Provide immediate and efficient response to customers' feedback,

d. Germany imported technology, CNC machines.

e. Provide OEM&Customized service.

Processing flow                                                                                                                  

1. Factory direct goods, price advantage, short production term

2. Germany imported equipment

3. Strictly quality control, 500000 pcs providing capacity monthly

4. Complete customer service system

5. 10 years manufacturing and 5 years exporting experiences

6. Customers involving all over the world.

7. Accepting small quantity sample order

8. Customer service purposes

9. Self-owned brand - CLUNT

10. Long-term cooperated forwarders make shipping cost lower and fast.

11. Products certifications: ISO 9001, CE, BV

12.  2 years quality guarantee.